Anping Chengke Wire Mesh Equipment Co., Ltd. |
|
Automatic Fence Mesh Welding Machine With Shearing Machine With Automatic Falling Mesh
Description
1. The fence mesh panel welding machine, which welding power comes from the spring. It is easily to control the welding pressure, more over ten times than the traditional hopper.
2. The farm fence mesh panel welding machine uses PLC control technique, welding time and separate welding adopt Japan, Sonydigital control system which can be input to touch screen control panel to adjust the mesh size, and it can weld different size mesh on the same wire mesh panel.
3. The cross wire feeding is automatic and driven by step motor, which makes the cross wire falling and mesh aperture size more accurate.
4.The mesh pulling system is controled by step motor, which is easy to gerulate mesh hole and mesh opening size is rather accurate, welding aperture could adjust randomly with certain range.
5.The machine use touch screen operation system, you can change the welding time and mesh size.
advantages
1. Feeding material:
The warp wire and weft wire are straightened and cutted from coil wire material ,realized by auto straightening and cutting machine.
The warp wire are placed on a corresponding wire penetrating mold
by worker, and the weft wire will be automatic falling down one by
one ,from the weft wire system
2. Welding mesh panel system:
The main machine starts welding and adopts a synchronous control
technology, both branch control welding time and welding time are
controlled by a Mitsubishi PLC digital programming system, and the
mesh opening size can be adjusted only by direct input on a touch
screen; and it could be exist different weft distance on one piece
of one mesh sheet
3. Drawing mesh panel system:
Panasonic ( Japan ) step motor controls the whole automatic mesh panel drawing process until one mesh panel finished, and the automatic mesh connecting and discharging system is started; the welding of the next mesh is started.
Specifications
Wire Diameter | 3-5mm |
Longitude Wire Space | 50-200mm |
Cross Wire Space | 50-200mm |
Width of Mesh | Max2500mm |
Welding Electrodes | 48pcs |
Welding Speed | 45times/min |
Longitude Wire Feeding | From Wire Coils |
Cross Wire Feeding | Pre-cut&Straightened |
Rated Electrical Power | 100kva*6pcs |
The Wire Mesh Welding Machine is also able to be made to order according to customer’s requirement. |
Used
1 . fence mesh for railway, highway, airport bridge and constructions.
2 . Mesh panel for goods shelf and storage racks.