Petrol Station Stainless Steel Material 220V Double Wall Automatic pipe Line Leak Detector

Petrol Station Stainless Steel Material 220V Double Wall Automatic Pipe Line Leak Detector

Guihe leak detection products have been helping operators detect spills, locate the source of leaks and take corrective action before an incident becomes a “news story.”

The key is quick leak detection and accurate location at the source of the leak. GUIHE sensor cable and monitoring systems let you do that, because if offers you:

Reliable and accurate fluid leak detection systems for pipelines, tanks, wharfs, airports, pumps and valves.
Sensor cables and probes that directly detect and pinpoint the source of petroleum leaks to help you take decisive action long before the spill can create damage.

Early detection at the onset of small leaks well before a typical SCADA system will provide warning.
Configuration options that automatically shut off pumps or valves where appropriate.
Digital communications such as local, networked remote alarms and diagnostics including uplink to fuel system control rooms, remote SCADA sites, management systems, email, web or SMS.

Modular units so that simple or complex systems can be configured for current needs and allow for future expansion.
Whether your concern is gasoline, jet fuel, diesel, crude oil, or bio-fuels, GUIHE can provide a customizable fuel leak detection system tailored to meet your needs.

With the GUIHE fuel leak detection system, you can detect and pinpoint the source of a leak to help you take decisive action long before the spill can ruin your reputation.

This equipment consists of leak detection sensor, controller and related accessories. It have real-time leakage monitoring, Audible and visible alarm functions, designed specifically for oil or water monitoring between double-layer tanks and double-layer pipeline. When leakage occurs between the interlayers, the liquid in the interlayer contacts the sensor. The sensor will send an electronic signal to the leak detection controller. When the controller receives a signal from the sensor, the program will automatically determine the leakage and perform light and Audio alarm, user will respond according to the alarm situation and take response measures to avoid potential safety hazards and environmental pollution. The detector is equipped with digital output signals that can be chain controlled with third-party devices.

Technical Parameters

◆ Detector voltage: 220VAC ◆ Sensor voltage: 5VDC

◆ Alarming mode: audible and visual alarm ◆ Sensor length: Personally made

◆ Range of temperature: -40℃~ +70℃ ◆ Environment humidity: ＜85%

◆ Output mode: switch value ◆ Inspection time: ≤ 1s

◆ Range of pressure: 80Kpa~ 110Kpa ◆ Measurement accuracy: ＜3mm

◆ Dimension of detector: 300* 180* 113 ◆ Dimension of blind plate: DN50/ 80/ 100

◆ Connection mode: 485 series/ parallel

Operation Instructions

The indicator lights of all tanks are green under normal conditions; while the indicator lights will change and the alertor will give the alarm when it is in alarming state.

When the alertor sounds, the user can shut down the Mute Switch in the left of the detector .

In normal use, press the “Self-text” to detect leakage alarm controller can simulate the function of leakage in turn, after the simulation test is completed, the console can be re-powered.

3.The status indication of the leakage detector is shown as follows: