CE Standard Nut Processing Machine , Commercial Pecan Shelling Machine

Commercial pecan shelling machine for black small fresh walnuts pecan nut

Description of Walnut shelling machine
Walnut shelling machine is mainly used for hard shelling of walnuts. Different types of walnuts, different yields and integrity of nuts, and the internal clearance is adjusted to achieve good shelling effect. The upper part of the machine is fed by mechanical internal shelling. Discharge. Walnut shelling machine is made of high carbon steel and ordinary steel. It consists of feeder, pattern stator and rotor, cycloidal pin reducer, etc. It has the characteristics of compact structure, high output, low breaking rate and convenient use and maintenance. The ideal walnut shelling device.

Applicable products: walnut
Application area: Agriculture
Equipment type: shelling machine
Model: TK-HT
Feeding amount: 300-400kg/h
Loss rate: 0.2 (%)
Weight: 260Kg
Power type: electric

Uses and advantages
Walnut shelling machine has the advantages of compact structure, full automation, simple operation, stable and reliable performance, high shelling efficiency, low breaking rate of walnut kernel, good sorting and low loss rate. It can remove clods, stones, mulch and other debris in the walnut kernel.

Working principle
The machine is mainly used for peeling the shell of dried walnuts, and can flexibly adjust the internal gap according to the variety and size of the walnut, so as to achieve a good shelling effect. The machine feeds from the upper hopper, and the shell and shell are separated after being shelled. Thereby facilitating manual branching and improving work efficiency.

Operational notes
1. Check whether the connections and transmission components are loose and there are no abnormalities.
2. Whether the power supply and electrical device terminals are in good contact.
3. The roller gap has been adjusted before leaving the factory, because the size of the walnut is different, the size of the gap can be adjusted according to the size of the actual fruit shape.
4. Clearance adjustment:
The small size is: loosen the lower bolt of the pulley and rotate the top nut of the middle shaft. The upward adjustment gap becomes larger and larger, the smaller the lower gap becomes smaller, and the smaller the shell is, the bolt is fixed again after adjustment;
Large is: the speed of regulation and control, the faster the speed, the smaller the shell, the slower the shell is.
5. Because the walnut varieties have different shell thicknesses, put a small amount of walnuts to see the shelling effect before starting the machine. By adjusting the size or speed of the roller gap, the high integrity rate of the broken shell is achieved. The small fruit is unshelled and then removed again after the re-adjustment gap.
6. Pay attention to oil injection when using the geared motor. Check the tightening of each transmission component in time for normal use.
If the equipment is well maintained and maintained, it will extend the life of the equipment, save costs and increase production efficiency!