High Filling Precision Carbonated Drink Bottling Machine 15000 Bottles / Hour

DCGF80-80-18 Carbonated Soft Drinks Making Machine / Bottling Equipment 

Description:

1.The machine adopts multi-section processing mode such hot water circulating spray sterilization, warm water pre-heating and cold water cooling. The sterilizing temperature and time can be freely adjusted. It is suitable for pasteurization of beverages packed by various pop cans, PET bottles and glass bottles.
2.The bottle after capping is conveyed by the conveyor belt into the inside of the channel type pasteurizer. In all temperature areas inside the pasteurizer, the temperature of the product is precisely adjusted. When passing through channel, the vessel is sprayed by water of different temperature, that is, the pre-heating section, heating section and cooling section.
3.The gradual heating at the front of the sterilizer and the gradual cooling at the rear are very important. In this way, the taste loss that may be caused by overheating is prevented, and the bottle breaking comes of by sudden change of heat stress of vessel is avoided. In the channel type pasteurizer, our company normally adopts the spray nozzle system(a large-sized spray nozzle is installed, and hot water will be sprayed onto the vessel through the spray nozzle), maintained at different temperatures for different process requirements by a certain time, then sent to the transmission.

Feature :

1. The soft drink filling machine adopts advanced technology and Nanjing valves, with high filling precision.The speed of filling is fast and the liquid amount is controlled accurately,with same filling level.

2. The soft drink filling machine filling device can be stopped automatically when there is no bottle or bottles are damaged.

3. Pneumatic value and damped gears are used for bottle conveying, the noise is low and the whole machine runs smoothly.

Specification:

Details:

1. The soft drink filling machine filling device can be stopped automatically when there is no bottle or bottles are damaged.

2. Pneumatic value and damped gears are used for bottle conveying, the noise is low and the whole machine runs smoothly.

3. The magnetic torque is used for screw capping.The power of screw capping can be adjusted without steps.The power of the screw capping can also be fixed.The capps can not be damaged,the capping is reliable.

We have about 20 years’ experiences in manufacturing beverage machines.
We can help you to start a new company in beverage making.