Active Member
|
[China]
Address: 1708#, No. 1 building, Lane 2742, Pudong Avenue Road, Pudong, Shanghai
Contact name:Mrs. Lotus
Higee Machinery (Shanghai) Co.,Ltd |
|
|
3500BHP Automatic bottle blowing machine and blow moulding machine with plastic bott
Production:
MW-D5L4series is the most stable two-step fully-automatic pet
stretch-blow molding machines(reheat). It has 4 to 6 cavities and
the maximum capacity of the products is 5000ml. It can blow bottles
in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth,
hot filling, and other packing containers, which is made of plastic
of crystalline type, such as PET
1.High Automatization
2.High Intelligence: The machine can be controlled through touch
screen and running status is shown on it.
3.High Quality: Steady infrared heating system blowing and highly
precise blow-mould closing system ensure quality.
4.High Speed: 2800-3500BPH(4-cavity),
5.No Contamination: Closed production zone, good self-lubrication
system avoid contamination.
6.Low Cost: Low consumption of electricity, air and water.
7.High Transparency: Easy maintenance, absolute safety, visual
inspection, low noise.
Machine Features
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms
in shapes by adjusting the light tube and the length of the
reflecting board in the preheating area, and eternal temperature in
the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each
mechanical action, which will make the procedures turn into a state
of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive
the action instead of the oil pump.
Technical Parameters:
| Model | Unit | MW-D5L4 | |
| Clamping System | Cavity Quantity | cavities | 4 |
| Clamping Force | KG | 65000 | |
| Mold Stroke | mm | 200 | |
| Stretching Rod Stroke | mm | 360 | |
| Stretching Rod Dia. | mm | 14 | |
| Bottom Mould Stroke | mm | 50 | |
| Pitch Distance | mm | 190.5 | |
| Preform Holder Quantity | PCS | 90 | |
| Container Spec. | Max.Container Volume | ml | 5000 |
| Max.Container Height | mm | 320 | |
| Max.Container Diameter | mm | 180 | |
| Max Preform Height | mm | 160 | |
| Max.Neck Diameter | mm | 45 | |
| Output | BPH | 2800-3500 | |
| Electrical System | Heating Oven Quantity | Zone | 4 |
| Number of Lamp | PCS | 4*12 | |
| Heating Power | KW | 85 | |
| Installed Power | KW | 110 | |
| Voltage | Voltage | Customized | |
| Actual Power | KW | 48 | |
| Air System | Operating Pressure | Mpa | 0.7-0.9 |
| Blowing Pressure | Mpa | 2.5-30 | |
| High Pressure Air Consumption | L/min | 5.0/40 | |
| Chiller System | Temperature Range | Degree | 9-13 |
| Pressure | Mpa | 0.4 | |
| Capacity | HP | 10 | |
| Machine | Machine Dimension | M | 4.5*2.1*2.2 |
| Machine Weight | KG | 5500 | |
Installation:
Our engineer will travel to buyer’s country within 10－20 days after receipt of confirmation in the written form from client informing that the goods arrived in site and civil works is ready for installation. The client has to buy round tickets and arrange all local facilities including food, lodging, and transportation during their staying period in buyer’s country. The buyer would pay USD 120/day for each engineer during journey.
Warranty:
One year from the date of Installation or acceptance of the Plant whichever comes first.
Note:
If the client needs our manufacturer to provide the training program depending on the experience of the local people and the client requirement as the local people has no experience in this kind of plant, the client has to send their people (about 4 technical engineers/workers) to China
