Monoblock Type Craft Beer Canning Equipment Isobaric Filling 2000 Cans Per Hour

there are two kinds of carbonated drink canning machine: rotary monobloc and liner split.

1. This kinds of production line is mainly used in washing filling and sealing for easy pull cans

made of tinplate, aluminum alloy or rion.

2. It adopts isobaric filling, can be used to fill all kinds of carbonated beverage, like beer,

cola,sparking water, soft drink, energy drink, soda water etc.

3. This can filling line is suitable same can diameter but different can height.With different can

diameter, the filling line should be set with extra can change parts to share one filling line.

4. It has such function as automatic lift, automatic turnover, filling and sealing for heaps of empty

cans,it is very large.

 rotary monobloc

Machine process:

1, The empty can reaches into the can lifting cylinder after passing through the pneumatic triplex

parts, and the empty can is raised and the conical seal gasket under the filling valve is sealed.

2, The position turning block of the filling valve turns the position and opens the valve under the

action of another cylinder. The air is filled into the empty can to form the equal pressure.

3, From a large material barrel, the beer passes through 14 small conduits and flows into empty

can. When the liquid level in the empty can blocks the gas return pipe mouth, then the filling stops.

4, Under the action of arm, the de-forming valve will slowly discharge the air and pressure, the

can supporting cylinder will continue to fall. After it's discharged, the can is sent to the sealing

machine for sealing machine for sealing by the hook chain that runs synchronously. During the

sealing, the sealing wheel carries out pre-sealing and then real sealing. After it's sealed, the can

is pushed out by the beating head of the cap beating mechanism and then dialed by dial to the

conveyor belt for conveying.

Production Line for Carbonated Beverage Can Filling Machine --Main features of the equipment:

1) The filling and sealing are of integral design.

2) High quality equipment and parts for Germany, Japan, and Italy and with long life.

3) Designed into the most reasonable configuration by experienced electric engineers.

4) The overall production speed can be freely set on the touch screen according to requirments

by various language.

5)All common malfunctions will send out alarms automatically and malfunction cause and

positions will be given correspondingly.

6) According to the different malfunction levels, the PLC will automatically determin if the

operation shall continue or the machine shall be stopped.

Technical Parameters for Production Line for Carbonated Beverage Can Filling Machine :

overall look

filling

sealing

Besides this rotary monoblock machine, we also have split one

Model: GDG-12

Production capacity: 1000-2000b/h

Filling head:12

Filling pressure: 0.15-0.35Mpa

Motor Power: 1.5kw

Outer size: 1200×1150×1800mm

Weight: 1200kg

we also can supply the complete line plants for carbonated beverage

production

1. water treatment system

2. CO2 mixer

3. Depalletizer