5-100ML Vacuum Perfume Filling And Capping Machine Large Capacity With Valve Placer

5-100ML Perfume Filling Machines With Perfume Vacuum Filling Machine,Valve Placer,Sealing Machine,Outer Cover Capping

Application

Suitable for Laundry Detergent Liquid filling, capping, labeling and cartoning.

Air Pressure: 0.4～0.6MPa

Capacity: 2,000-5,000 BPH

Filling Volume: 0～5L

Required Operator: 3-4 workers

Equipment Noise: ≤80dB

Also suitable for

Food: Jam, Sauce, Paste, Honey, Chili Sauce, Ketchup, Edible oil, Olive oil, Salad Dressing, Salsa, Barbecue Sauce.

Pharmaceutical: Liquid vitamins, E-liquid, Peroxide, Syrup, Eye drops, Fish oil, Nasal spray, Alcohol, Lotion.

Daily Chemical: Liquid soap, Cleaning Chemical, Laundry liquid, Toilet Cleaning Agent, Dish Detergent, Detergent, Cleaning Fluid, Bleach, Disinfectant.

Personal Care: Shampoo, Hair Care, Hair Gel, Lotion, Lip Balm, Nail Polish, Shower Gel, Hand Soap, Hand Cream, Body Lotion, Cream, Perfume.

Agrochemical: Pesticide, Fertilizer, Herbicide, Paraquat, Imazethapyr, Bactericide, Rodenticide.

Chemical: Corrosive Product, Fuel, Lubricating oil, Antifreeze, Brake Fluid, Paint, Coating, Glue, Adhesive, Additive.

Overview:

The machine is suitable for round bottle and flat bottle. Can fill syrup, lipometric etc. SUS304 stainless steel peristaltic pump volumetric filling, with high filling precision, stable working and easy operation etc; meet GMP requirement.

The machine take bottles to the turn table by conveyor, the board on the table take bottles into each station, then fill, insert valve, screw cap and there is approaching switch in each station, checking position signal and carry on different operation. The line through electricity, pneumatic and mechanism to realize the above work.

Filling process:

1st step: the bottle feeding machine will deliver the bottle to the parts offer ,the bottle will enter to the station of the parts offer and devising by the slicer, when the slicer turned to one station ,the photocell head stretch into the bottle ,the filling head fall ,the filling will begin. when the cylinder rise to the station ,the magnetic will give an signal ,the filling will be end.

2nd step: after filling when the station turned to the lower valve, the photo electricity explored the bottle ,the photoelectric will send signal to the electromagnetic valve ,the electromagnetic will change its direction. the washing and charging facility will rush the cap to the bottle of the station. when the cylinder rush to the station the magnetic switch will send information to the magnetic valve. the magnetic valve will change its direction ,the step is finish.

3rdstep : when the station turned to the capping facility, the photoelectric explored the bottle ,it will send information to the magnetic valve, the magnetic valve turned direction ,the capping facility start to work, after that it will send signal to the magnetic valve ,the capping is end. the part offer turned to the next station. the bottle will be deliver by the conveyor, the whole process is end and just need to repeat this process.

Bottle feeding machine, Full automatic bottle unscrambler

Bottle rinsing machine-air rinser, Bottle rinsing machine-wet rinser

Servo type piston filling machine, Gravity liquid filling machine, Corrosive liquid filling machine

Linear Capping machine, Rotary Capping machine, Cap pressing machine, Crimping machine

Induction sealer

Round bottle labeling machine, Front & back labeling machine, Sleeve labeling machine

Ink jet printer

Shrink packing machine

Carton erector

Carton packaging machine

Carton sealing machine

Palletizer