Fully Automatic Corrugated Box Printing Folding Gluer High Speed

  Fully Automatic High-Speed Printing Folding Gluer Linkage Line

Automatic Corrugated Box Colour Printing Making Machine

INTRODUCTION OF FLEXO PRINTING AND SLOTTING AND DIE CUTTING MACHINE

1. This machine is component with the feeding unit,printing unit,slotting unit,die cutting unit ,scrap remover unit and inline fold gluer,can accomplish the process of the corrugate paperboard printing, slotting or die cutting and wastage cleaning.

FLEXO PRINTING AND SLOTTING AND DIE CUTTING MACHINE TECHNICAL PARAMETERS

LOCAL DETAILS

1. Cardboard feeding unit ( servo motor drive,one unit)   ⑴ Unit moving ① Each unit is electric moving left and right with warning bell. When unit moving, the bell will be warning to make sure the operator safe. The moving motor with constant torsional moment which can buffer the impact of the two units when the operation is wrong.   ② After all the units closed, each part is pneumatic locked. There is also lead locked cylinder which can make each part locked with bottom-track lock. If the cylinder is not locked, the main motor will not work.   ⑵ Lead edge feed system ① The lead edge feed unit is servo motor control system, servo motor is original CT brand From UK,with long life and no noise,running with high feeding accuracy for all the machine lift.and servo model feeding not corrugate board thickness and strength damage.   ② Wind absorbing auxiliary paperboard feeding, can make the cardboard feed favoringly. The volume of the wind can be adjusted accord the camber of the paperboard.   ③ Electric and PLC control the side baffles move left and right.electric control the behind baffles move back and front.The distance between the frontal baffles and the feed table is synchronous manual adjust.with paper board pusher system by pneumatic.

2. The printing Unit.(Four units)   ⑴ The printing roller ① The printing roller is steel material, after balance correction.   ② The surface of the printing roller is grinded, polished and hard chromium plating.   ③ The-printing-plate-reel structure is adopted. The pedal switch control the printing roller run clockwise and anticlockwise,makes change printing plate easy.   ④ A complete slot in the printing roller for hung the printing plate,the size of the slot is 9mm×3mm.   ⑵ The down press printing vacuum transmission table ① Vacuum table with ceramic wheels plating for transfer the corrugate board,with high precision,even the bend board can high precision transmission and printing   ② With vacumm transfer system can pass the exactly carton size sheet,and corrugate board without strength damage cause from the press wheels,also can printing high accuracy for bend corrugate board.

3. The slotting unit. The line creasing device   ① Creasing wheel roller material is steel tube with out gaps.   ② The surface of the creasing wheel roller is grinded, polished and hard chromium plating. And after balance corrective.   ③ With two layers creasing wheels,one set pre creasing wheels,one set creasing wheels,increasing the creasing quality.make the carton after fold more normative.   ④ The distance between the up and down line creasing wheel roller is adjusted by electric,with touch screen adjust and show the date,the adjusting scope is 2-12mm.The up and down line creasing wheel roller adopt the crosshead connect with the drive gears,when adjust the distance between the two rollers,the distance between the two driver gears of the two rollers will not changed.

FAQ

Q1: Are you a manufacturer or a trading company?
A: We have our own factory in Tangshan, Hebei Province.

Q2. What is the machine warranty?
A: One year. After the warranty, we still provide technical support to buyer at low cost.

Q3. What is the production time while placing order?
A: Normally about 20-30 days.

Q4. What is the delivery time?
A: 35-50days after deposit.

Q5. Can your company handle shipping for customers?
A: Yes, just give us destination sea port or container yard.

Q6. Does the packing strong?
A: Yes. Adopts moisture-proof and shock-proof packaging which is suitable for long-distance road transportation and various types of weather conditions. A full set of maintenance and operation manuals is included.

Q7. How about the machine installation and training?
A: 1) We provide training in our factory for free; 2) We can send technicians (engineers) to your factory for installation and training. You shall pay round trip air fare and accommodations, plus each technician charges USD100/per day.

Q8. Do you have machines in stock?
A: For standard model, we have a large quantity in stock.For special model,we need 20-30 days to produce for you.

Q9. How can you assure the machines' quality?
A: Each machine will be test running at least 24 hours before delivery to assure the quality. And during the warranty, we will give spare parts for free if machine has any problem.

Q10. Do you inspect machines or test running before packing?
A: Of course we do. We have QC department to debug the machine before packing. If you want to use specific material to do the test running, you need to pay for the cost of the material

Q11. What's the payment term?
A: T/T 30% in advance, the balance shall be paid before delivery. Also accept payment by West Union or L/C at sight.

Q12. Do you accept factory visiting?
A: Warmly welcome for your visiting.

Q13. How many years are you in printing field?
A: JIGUO factory is more than 20years.