Zhangjiagang Apollo Machinery Co.,ltd. |
|
jerry can 20L blow molding machine
Specification of the machine :
1,Double- Crank four-pull bar Colsing Molding, Balance of fixed sliding
2,Sealing and Tensile adopt double pole combined, useful for products forming !
3,Advanced Air route design, Single ,double intake both ok ! Low pressure mechanical closing moulds , sealing, tensile, high pressure blowing bottles !
4,Microcomputer automatic controller, Simple and easy operation
5,Perform Bottles heating by infrared ray, Controlled constant pressure control , Frequency controlled , To achieve the best accuracy of blowing
6, Functional and Economical types of investment
7, Small Space , Structural stability
8, Simple Operation , one person can be ok !
9,Also can supply 3-5 gallon different sizes of perform bottles and caps
Parament and Configuration | |||
Theory Capacity | According to different of bottles
| 80-100pcs/h | |
Max.Volume of bottles | According to number of cavity | 7L(two Cavity) 30L (one Cavity) | |
Moulds | one or two cavity | 1or2 cavities | |
Max.Diameter of bottles | 355MM | ||
Max.height | 453MM | ||
Moulds Area | 600*600MM | ||
Max.Thickness of Moulds | 390MM | ||
Stroke moulds | 350MM | ||
Max.Stretch Length | 500MM | ||
Closing Moulds | 320KN | ||
Power | Power | 220~380V,50~60Hz | |
Heating Power | 27.8KW | ||
Working Pressure | 0.8Mpa | ||
Blowing Pressure | 3.0Mpa | ||
Size of Main machine | L*W*H | 2250*740*1900MM | |
Size of Heating machine | L*W*H | 2440*620*1740MM | |
weight of main machine | 1000Kg | ||
weight of heating machine | 400Kg | ||
auxiliary machine | Air compressor for high pressure | 1.2M3/3.0Mpa/15Kw | |
Dryer machine | 1.0M3/3.0Mpa/375KW | ||
Air filter 2 | 1.0m3/3.0Mpa |
Some more pictures about our machine and its products