Injection Moulding Machine KBM-4800A
shot weight:1225g--1600g
screw diameter:70mm--80mm
clamping force: 480ton
space between tie bars:760x760mm
Technique parameter:
Item | Unit | KBM-4800A |
Injection Unit | | |
Screw Diameter | mm | 70 | 75 | 80 |
Screw L/D Ratio | L/D | 22.6 | 21 | 19.7 |
Theoretical Shot Volume | cm 3 | 1346 | 1545 | 1758 |
Shot Weight(ps) | g | 1225 | 1406 | 1600 |
Injection Pressure | MPa | 201 | 175 | 154 |
Theoretical Injection Rate(ps) | g/s | 370 | 423 | 484 |
Plasticising Capacity | g/s | 60.4 | 71.4 | 83.7 |
Screw Torque | N.m | 3490 |
Max.Screw Rotate Speed | r/min | 150 |
Injection Stroke | mm | 350 |
Clamping Unit | | |
Max.Clamping Force | KN | 4800 |
Max.Opening Stroke | mm | 770 |
Space Between Tie Bars(V*H) | mm | 760×760 |
Mould height(min-max) | mm | 280-790 |
Max.Daylight | mm | 1560 |
Ejector Force | KN | 113.4 |
Ejector Stroke | mm | 195 |
Ejector Quantity | | 13 |
Other | | |
Pump Motor Power | KW | 45 |
Pump Pressure | MPa | 16 |
Heating Power | KW | 28 |
Heating Zone | | 5 |
Size | m | 7.5×2×2.4 |
Net Weight | t | 19.8 |
Oil Tank Capacity | L | 850 |
International Designation | | 4800-2710 |