SUV Car Assembly Line for Gasoline in SKD/CKD to Save Customs Duty
Advantages of assembling the City SUV Car Powered by Gasoline local:
--- Save Customs Duty and other tax;
--- Save Shipping Costs;
--- Increase margin;
--- Improve competitiveness;
--- Develop your local industry;
--- Creat job opportunities.
1. Description of the SUV Car Powered by Gasoline:
| Spec | 1.5T+6MT | 1.5T+6AT |
| Elite | Luxury | Elite | Luxury |
| FOB Chongqing | USD11900 | USD12900 | USD13900 | USD14500 |
| | Basic Parameter |
| Lenghth x Width x Height (mm) | 4806×1870×1691 |
| Wheel Base (mm) | 2800 |
| Kerb Mass (Kg) | 1541 | 1565 |
| Ground Clearance(mm) | 200(no-load) |
| Trunk Capacity(L) | Up to 1800L |
| Seats | 5/6/7 |
| | Performance Parameter |
| Emission Standard | EuroⅥ |
| Max Power (Kw/rpm) | 115/5600 |
| Max Torque (N·M/rpm) | 215/2000-4000 |
| Max.Speed(km/h) | 175 |
| Fuel Tank Capacity (L) | 55 |
| | Chassis System |
| Braking System (Front/Rear) | Front Vented Disc/Rear Disc |
| Front Suspension/Rear Suspension | McPherson Independent Suspension / Torsion Bar Suspension |
| Steering System | EPS(Electric Power Steering) |
| Driving Mode | Front Engine,Front Wheel Drive |
| Wheel Hub Type | 17inch Aluminu Alloy Wheel Hub | 18 inch Multiple Aluminium Alloy Wheel Hub |
| Tire Size | 225/60R17 | 225/55R18 | 225/55R18 | 225/55R18 |
2. Our service and our capability:
In this project, our Chinese company will provide technology support to your company, by sending engineers and technicians to your
local place to training your staff, and passing on our China's knowledge your staff (including but
not limited to the vehicle manufacturing skills, management system
of the vehicle assembly factory, etc. ...); in the same time,
supply the complete vehicle SKD/CKD parts for being re-assembled in your local place as well as the assembly equipments; and factory design, equipment layout design in the factory, ... ...
3. Our Cooperation Mode:
A. Trade Agency
At first stage, we can do exporting & importing trade business,
gradually build the mutual trust and favorable business
relationship, and then develop to project cooperation. If our
partner hasn’t gathered enough capital to do the project, this
cooperation way is recommended to accumulate funds and experience
for the project start later.
B. Turnkey Project/ Technology Transfer Mode
In this project, our oversea partners take 100% shareholdings, and
our Group assists you with technology and all necessary equipment
of the factory, all in "turn-key project" mode. You pay for the
technology transfer, while we help you to establish the assembly
factory and provide you automobile parts in SKD or CKD status for
assembling in order to cut your cost and simplify the production
process. We provide you with all the necessary technology
assistance and auto parts till you can master all required
technologies and be capable to assemble vehicles on your own
completely.
C. Joint Venture Mode
1st way: we take 15% of the shareholding and being responsible for offering
the Business Plan Assistance, Production Line Layout & Plant
Design, Equipment Installation & Debugging, Technology Support,
Worker Training, Manufacturing, Production & Quality Control
Management, Advice & Guidance for Sales & After-Sales,
Development Plan & Solution, etc.
2nd way: we take 35% of the shareholding and being responsible for offering
the Key Equipments, Business Plan Assistance, Production Line
Layout & Plant Design, Equipment Installation & Debugging,
Technology Support, Worker Training, Manufacturing, Production
& Quality Control Management, Advice & Guidance for Sales
& After-Sales, Development Plan & Solution, etc.
3rd way: we take more than 35% of the shareholding and being responsible
for offering the Capital, some Credit based on reliable guarantee,
Key Equipments, Business Plan Assistance Production Line Layout
& Plant Design, Equipment Installation & Debugging,
Technology Support, Worker Training, Manufacturing, Production
& Quality Control Management, Advice & Guidance for Sales
& After-Sales, Development Plan & Solution, etc.
4. Requirements on our Cooperation Partners:
If you start with a trade business, a necessary amount of funds for
vehicle cycle purchase, a decent showroom for auto exhibition, and
a kind of repair shop, are enough. However, if you want to start
the auto assembly plant project, you have to reach the following
subjective and objective requirements:
• Workshop / Factory: 5000-8000 square meters to start, and a piece of industrial land
around 20000-25000 square meters for expansion in the future.
• Fund: You need to have the necessary economic strength & investment
capacity, specifically, two million USD at least, excluding land
and workshop.
• Market channel: You’d better have your own car sales channel & network, for
automobile-related business.
• Auto import tariff policy: The import tariff policy in your country is very important, the
difference of import tariff between CKD (completely knocked down)
and CBU (complete built unit) shall be at least 30-35%; for
example, if the import tariff on CBU is 35%, so it must be 5% or
free on CKD. It is the key factor to set up an assembly plant in
locally overseas, however, if the import tariff on CKD is almost
the same as that on CBU, the auto plant will have not any profit
space and it makes no sense to start it.
• Good relationship with government: it can give you good and preferential policies or incentives on
this automobile assembly project, and even it can bring you big
orders for the assembly plant.
5. Process of our Auto KD Assembly Project:
6. Finally, this Auto KD Assembly Project is Profitable:
If you are interested, contact us now, we will never make you
disappointed! Seize this opportunity, you win, we win, win-win !!
Looking forward to your cooperation!!
