Function description
1:When the device is turned off, press the power button for a long
time. The buzzer
will prompt 2 times. The device will enter standby. In the power on
state, press and
hold the power button.
The buzzer will give 2 prompts, and the device will be shut down.
2:Heat plugger detection
Prompt through sound and image when inserting and removing normal
heat
plugger. When the system is not heated, the heat plugger normally
displays “√”
and the abnormal displays “×”. When inserting and pulling out the
normal heat
plugger, the buzzer will give a sound.
3 Program switching and temperature setting
In standby mode, press the function button to cycle the preset
programs P1-P4.
Long press the function button to enter the setting menu of the
current program.
Press the function button to cycle to shift the temperature and
heating time.
Temperature setting: press the power button once, the temperature
will be
increased by 10 ℃. The adjustment range is 100-300 ℃.