|
[China]
Trade Verify
Address: Floor 12, Building A, Rd Jiangshi, Quanju High-Tech Industry Park, Guangming District, Shenzhen, Guangdong Province, China
Contact name:Wave Luo
Shenzhen Atnj Communication Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Band4 AWS1700MHz Mobile Phone Signal Booster Repeater Output Power 20dBm
Band4 AWS1700MHz Mobile Phone Signal Booster for North South America
The 1700MHz AWS Repeater provides an affordable solution to solve
the indoor signal coverage problems due to signal fading and
attenuation caused by architecture obstacles. And its easy
installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It
picks up the strongest signal from BTS via the Donor Antenna,
linearly amplifies the signal and then retransmits it via the
Indoor Signal Distribution System to the weak/blind coverage area.
And the mobile signal is also amplified and retransmitted to the
BTS via the opposite direction.
Technical Specifications
Specifications | Parameters | |
Frequency Range (Customers to Choose) | Uplink | 1710-1755MHz |
Downlink | 2110-2155MHz | |
Frequency Bandwidth | 45MHz | |
Gain | 70dB | |
Automatic gain control (Step Attenuation) | 31dB @ 1dB/ Step | |
Auto Gain Control | 20dB Min. | |
Output Power(Customers to Choose) | 20dBm | |
Spurious Emission | ≤ -15dBm/30kHz | |
9kHz~1GHz: ≤ -36dBm/30kHz | ||
1GHz~12.75GHz: ≤ -30dBm/30kHz | ||
Inter-Modulation Attenuation ACPR | ≤ -40dBc / 30kHz (measured under rated output power) | |
In-band Ripple | ≤ 3dB | |
VSWR | <=2 | |
I/O Impedance | 50 Ω | |
Noise Figure | ≤ 5dB | |
System Delay | ≤ 5μs | |
RF Connector(Customers to Choose) | SMA (Female) | |
Operating Temperature | Operation: - 10°C ~ + 55°C / Storage: -20°C ~ +60°C | |
Power Supply | AC 110~220V±20%, 50/60Hz(AC 220V/ DC5V/2A power adapter) | |
Specification | Size: 165*115*35mm, Weight: 1.3kg | |
Further detail pls click here for downloading the products specification:
Single band AWS 1700MHz RF Repeater.pdf
Selling Point
2022 new upgraded Micro power smart single band signal repeater for residential use with WIFI monitoring and control function, it could cover 100- 300sqm (standard kit), and could support max 2 to 3 indoor antennas to cover over 800sqm. Analog repeater and Digital(Customized Selected Band) repeater for choice.
Product Description
We will send the correct plug adapter which is suitable for you according with the shipping address.
Easy to Install In 6 steps!
[1] Install the outdoor antenna on the roof, Face to signal tower.
[2] Connects one end of 15 meters coaxial cable with outdoor
antenna.
[3] The other end of 15 meters coaxial cable connects "BS" port.
[4] 5m Cable connect indoor antenna and "MS" port.
[5] Find an appropriate position to place the inside antenna.
[6] Power up and it is done. Cell phone signal would be full bars
in moment
We are manufacturer, and have our own factory.
Warranty
● Please note that we always check and test the product twice
before shipping and pack them well as far as possible.If the
product is broken at receiving,please contact us,we would resend
you a new one.
●Three years warranty period for our booster,it is only 3 months
for the accessories.If the booster have any problems, please show
us an video or some photos of your complete installation, we will
help you. Please do not open dispute or leave negative feedback
before contact us.we will reply you within 24 hours,except holiday.
FAQ:
Does this need installation? Can I set this up myself?
Installing our boosters is easy - in fact, 98% of our customers do it themselves. The device is plug-and-play, so all you need to do is attach the units with cables and mount the antennas. We provide simple installation guides and videos to help you along the way.
Moreover, we offer technical aftersales support after the delivery of your device, so you can have peace of mind knowing we're here to help.
