|
[China]
Trade Verify
Address: Floor 12, Building A, Rd Jiangshi, Quanju High-Tech Industry Park, Guangming District, Shenzhen, Guangdong Province, China
Contact name:Wave Luo
Shenzhen Atnj Communication Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
2G 3G 4G Tri Band Repeater Full Intelligent Mobile Signal Booster
Full intelligent 2G 3G 4G Mobile Signal Booster Tri Band Repeater
General
The 900/1800/2100MHz Pico Repeater provides an affordable solution
to solve the indoor signal coverage problems due to signal fading
and attenuation caused by architecture obstacles. And its easy
installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It
picks up the strongest signal from BTS via the Donor Antenna,
linearly amplifies the signal and then retransmits it via the
Indoor Signal Distribution System to the weak/blind coverage area.
And the mobile signal is also amplified and retransmitted to the
BTS via the opposite direction.
Specification:
Frequency | Uplink | Downlink | |||
GSM 900MHz | 890-915MHz | 935-960MHz | |||
4G 1800MHz | 1710-1785MHz | 1805-1880MHz | |||
3G 2100MHz | 1920-1980MHz | 2110-2170MHz | |||
Max. Gain | 68dB±2dB | 65dB±2dB | |||
Max. Output Power | 17dB±2dB | 20dB±2dB | |||
Bandwidth | Wide Band | ||||
Ripple in Band | ≤ 8dB | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Time Delay | ≤ 1.5 μs | ||||
MTBF | > 50000 hours | ||||
Impedance | 50 ohm | ||||
Power Supply | AC 90-240V,DC 5V/3A | ||||
Power LCD | Power indicator | ||||
Alarm LCD | Red | Strong input signal | |||
Green | Normal | ||||
Mechanical Specification | |||||
RF Connector | SMA-Female | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -10°C ~ +55°C | ||||
Environment Conditions | IP40 | ||||
Installation Type | Wall Installation | ||||
Size | 20.4*16.4*4.4cm | ||||
Gross Weight | 0.8Kg | ||||
Further detail pls click here for downloading the products specification:
900+1800+2100MHz A033 RF Repeater.pdf
HOW IT WORKS ?
1. Received a good outdoor signal from signal tower.
2. Cable transmits good signal to repeater.
3. Signal Booster enhance the received signal.
4. Improve indoor's cellphone signal.
Selling Point
⭐ Intelligent to guide the installation with LCD .
⭐ Real time display the signal strength .
⭐ Automatic dormancy when no user make the calling .
⭐ Automatic alarm when installation mistake and provide the according solution .
⭐ Automatic adjust the system gain to avoid the repeater self-excitation .
⭐ Initiative reminding when the device was damaged .
⭐ Supports from 0.2 to 20MHz bandwidth adjusted(Customized) .
⭐ Supports 5G bandwidth,
40MHz,50MHz,60MHz,70MHz,80MHz,90MHz,100MHz(Frequency Bandwidth
Customized) .
⭐With WIFI Monitor+Control(Customized),NMS(network management system),Function Optional .
⭐ A variety of appearance customization.
Specification:
[1] Gain : 65dB (DL) ;
[2] Output power : 20dBm
[3] GSM : Up Link 890 - 915MHz ; Down Link 935 - 960MHz
DCS : Up Link 1710 - 1785MHz ; Down Link 1805-1880MHz
WCDMA : Up Link 1920 - 1980MHz ; Down Link 2110-2170MHz
[4] Connector Type : N female connector
Packaging Including:
[1] Tri Band Booster Base Unit
[2] AC Power Cord
[3] Outdoor Panel Antenna
[4] Indoor Panel Antenna
[5] 15+5 Meters White Coax. Cable
We are manufacturer, and have our own factory.
Signal problem & installation technique supporting
1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70dBM.
2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.
3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.
4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.
FAQ:
1. Are you trading company or manufacturer ? Could I use our own
logo and label?
We are factory, with trading service. We provide OEM/OEM service.
2. Can I have a sample order? What is your MOQ?
Yes, we welcome sample order to test and check quality. MOQ is 1
for normal products.
3: Is it easy to set up your items?
A: Yes. We have a user manual and support technical support 24/7.
4. What is your warranty time?
We promise 3-year warranty for all products shipped from us.
Man-made sabotage and natural factors are not within the scope of
warranty.
5. Please feel free to contact us if any other questions.
