|
[China]
Trade Verify
Address: Floor 12, Building A, Rd Jiangshi, Quanju High-Tech Industry Park, Guangming District, Shenzhen, Guangdong Province, China
Contact name:Wave Luo
Shenzhen Atnj Communication Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Customized 1900MHz 3G Network Signal Booster PCS Repeater Amplifier
5 Watt Customized 1900MHz 3G Network Signal Booster PCS Repeater Amplifier
Model No : AT-MS-PCS
With ALC AGC Function
Can control gain automatically. Avoid base station interference
(Band 2) 1900MHz -- Uplink frequency : 1850 - 1910MHz / Downlink
frequency : 1930 - 1990MHz
Network support : 3G 4G Voice
Gain : 90dB
Output power : 5watt
Power Supply : AC110V～220V;DC+24V 5A
Connector Type : N-F
Wide Range .
Single Band Repeater with AGC/MGC | ||||
Device Model | AT-MS-PCS | |||
Frenquecy Range | UplinK:1850-1910MHz Downlink:1930-1990MHz | |||
Working System | Band2 PCS 1900MHz | |||
Gain | 90dB | |||
Device Output Power | 37dBm | |||
Bandwidth | Wide Range | |||
Ripple in Band | ≤4dB | |||
Noise Figure @ Max.Gain | ≤6dB | |||
V.S.W.R | ≤2dB | |||
MTBF | >50000Hours | |||
Power Supply | AC110V～220V;DC+24V5A | |||
Power Comsumption | <20W | |||
Impedance Matching | 50ohm | |||
Mechanical Specification | ||||
RF Connector | N/F | |||
Cooling | Heatsink Convection Cooling | |||
Dimension | 170*130*26(mm) | |||
Net Weight | 0.35KG | |||
Installation Type | Wall Installation or Desk | |||
Environment Conditions | IP55X | |||
Origin | Shenzhen | |||
Operating Temperature | -10°C~55°C | |||
Further detail pls click here for downloading the products specification:
5W 1900MHz High Power Signal Repeater.pdf
Selling Point
1. Smart LCD : Show the real-time signal strength.
2. Sleeping Mode : When no user calls, the device works in Sleeping mode, so as to achieve the purpose of energy saving.
3. ALC(Automatic Level Control) : Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling and data transfer quality.
4. AGC (Automatic Gain Control) : When the downlink output signal is too strong or self-oscillated, booster can automatically reduce the gain and reduce the interference signal.
5. MGC (Manual Gain Control) : In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-33dB.
Output Power : 5W/10W/20W
Power Supply : AC adapter
Size : 308*219* 135mm
Weight : 7.0kg
FAQ:
1. Q: Why choose us for cooperation?
A: We have the professional engineer to develop and make them suit for all over the world.we also will deal with all the problem when you have problem and reply to you at any time.
2. Q: Can this mobile signal repeater create a signal where there is no cell signal before?
A: The mobile signal repeater cannot produce a signal, only amplify a weak one.
3. Q: How about gain and output power of your device?
A: Different models, gain and output power are
different,for more details, please contact us.
4. Q: What's your device lifespan?
A: Normally our device can be used 5-10 years.
5. Q: How many square meters can be covered?
A: For different models, the covered square meters
are different.
6. Q: Can I use your device in suburbs or remote areas?
A: Yes, as long as you can find a good signal
source, our signal booster can help you solve signal problems in
remote areas.
