Shenzhen Atnj Communication Technology Co., Ltd. |
Verified Suppliers
|
|
70dB Gain 4G Range Extender 2100MHz Mobile Network Signal Booster
Mobile Signal Booster Repeater Amplifier 2100MHz Mobile Network
Model No AS-007-W3
1, Intelligent to guide the installation with LCD
2, Real time display the signal strength.
3, Automatic dormancy when no user make the calling
4, Automatic alarm when installation mistake and provide the
according solution
5, Automatic adjust the system gain to avoid the repeater
self-excitation
6, initiative reminding when the device was damaged.
Description
Specifications | Parameters | |
Frequency Range (Customers to Choose) | Uplink | 1920-1980MHz |
Downlink | 2110-2170MHz | |
Frequency Bandwidth (3dB Bandwidth) | 75MHz | |
Gain | 70dB | |
Automatic gain control (Step Attenuation) | 31dB @ 1dB/ Step | |
Auto Gain Control | 20dB Min. | |
Output Power(Customers to Choose) | 17±3dBm | |
Spurious Emission | ≤ -15dBm/30kHz | |
9kHz~1GHz: ≤ -36dBm/30kHz | ||
1GHz~12.75GHz: ≤ -30dBm/30kHz | ||
Inter-Modulation Attenuation ACPR | ≤ -40dBc / 30kHz (measured under rated output power) | |
In-band Ripple | ≤ 3dB | |
VSWR | <=2 | |
I/O Impedance | 50 Ω | |
Noise Figure | ≤ 5dB | |
System Delay | ≤ 5μs | |
RF Connector(Customers to Choose) | SMA(F) | |
Operating Temperature | - 10°C ~ + 55°C | |
Dimensions | 165*130*40 (mm) | |
HS Code | 8543709200 |
Further detail pls click here for downloading the products specification:
WCDMA 2100MHz B07 Signal Repeater.pdf
Product Description
GlobaL application ATNJ factory 2100MHz 3G signal repeater for your
selection:
WCDMA 2100MHz 3G Pico repeater is applied specifically in
small area indoor DAS system. The base station signal is coupled
and amplified by Pico repeater into in building system. The
amplified signals is transmitted by indoor antenna. Meanwhile the
indoor antenna receives the cell phone signal, and send the signal
to the base station as uplink. This method can eliminate the signal
dead spot, reject the interference, provide the stable signal
communication for cell phone users. This Pico repeater mainly
solves the problem spot problem in building. The coverage area is
as large as 3000 square meters in open space, and 1000 square
meters in partial obstacle area, 500 square meters in complete
obstacle area. The edge power level for coverage area is above
85dBm. The repeater output power level is less than 20dBm.
Pico Repeater is a bi-directional amplifier that allows for the
reception of signals, amplifies the signal and re-transmits into
areas where there is no or very low signal level coverage enabling
a mobile user to establish a call connection.
Pico Repeater can be deployed in indoor coverage and dead area. It
is especially advantageous to use in 100M2-1000M2,which is a very
economical solution. The output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.
Product Images
FAQ
1. Are you trading company or manufacturer ? Could I use our own
logo and label?
We are factory, with trading service. We provide OEM/OEM service.
2. Can I have a sample order? What is your MOQ?
Yes, we welcome sample order to test and check quality. MOQ is 1
for normal products.
3.How to check precise signal level in dB?
4. What is your warranty time?
We promise 3-year warranty for all products shipped from us.
Man-made sabotage and natural factors are not within the scope of
warranty.
5. Please feel free to contact us if there are any other questions.