1750130733 Wincor Nixdorf TP07A TP07 Receipt Printer Front Parts New

• KEY FEATURE

1. TPO7A: Allowed maximum rewinding outside: 260 / 180 mm

2. Printed pre-end teller/printed end teller
print pre-announcer
The sensor that prints the pre-stalk indicator is located in the reel box. The sensor tells the user whether there is a minimum amount of printing. The difference of the user's situation can be analyzed at a glance. For example, it is displayed on the upper part of the printer. The yellow LED on the upper floor is on
printer
The sensor of the print signal is located next to the groove of the print face.
I wish that different situations can be analyzed one by one, such as inscribed on the cauldron. Printed upstairs yellow bear LED dry

​3. Insert the front edge of the sheet into the printing slot (1) Push the printing table until it is automatically drawn in and cut off, and the printed table is collected and output as the first sheet at the output port The following text is printed on the top of the box, and it is clear that the installation is correct:
lf you can read this print, Autoloading is successful (if you can print the text in this book, it will be mounted on the surface) and it will be exported and collected.

• Other parts promotion

• Image