Active Member
|
[China]
Address: R 706. Shangtang Commercial building, Longhua Distric, Shenzhen, China
Contact name:Anna
AOLI MINER |
|
|
LTC asic miner Antminer L7 9300Mh LTC mining Scrypt 3425W doge coin machine
L7 9300M
| Product Glance | Value |
| Version | L7 |
| Model | 240-L |
| Crypto Algorithm/Coins | Scrypt |
| Hashrate, MH/s | 9300 ± 3% |
| power on wall@25℃, Watt | 3350± 10% |
| power efficiency on wall @25°C, J/TH | 0.36 ± 10% |
L7 universal specification configuration
| Detailed Characteristics | Value |
| Power Supply | |
| Power supply AC input voltage, Volt (1-1) | 200~240 |
| Power supply AC Input Frequency Range, Hz | 47~63 |
| Power supply AC Input current, Amp(1-2) | 20(1-3) |
| Hardware Configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package), mm(2-1) | 370*195.5*290 |
| Miner Size (Length*Width*Height, with package), mm | 570*316*430 |
| Net weight, kg (2-2) | 13.5 |
| Gross weight, kg | 15 |
| Environment Requirements | |
| Operation temperature, °C | 0~40 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
| Operation altitude, m(3-1) | ≤2000 |
Notes:
(1-1)Caution: Wrong input voltage may probably cause miner damaged
(1-2)Max condition: temperature 40°C, altitude 0m
(1-3)Two AC input wires, 10A per wire
(2-1)Including PSU size
(2-2)Including PSU weight
(3-1)When the miner is used at an altitude from 1000m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m
Don'ts to follow:
IMPORTANT: Do not use multiple PSUs to power one hash board.
1. Do not use the miner in an enclosed or confined place. Any items blocking the air flow of the miner is prohibited.
2. Do not use place the miner in an environment where there is high condensation or high level of salt content and humidity in the air.
The recommended humidity is below 65%. Coastal places are subject
to large salinity in the air, which can easily damage the hash
board.
3. Do not use the miner at extreme temperatures. It is recommended
that the working environment temperature be 5 to 35 degrees
Celsius.
At low ambient temperature, the hash rate will be low. At high temperature for a long time, the miner will malfunction.
4. Do not use water curtain (for cooling) in a situation where a large amount of dust is accumulated, water vapor will adhere to the dust accumulation area and corrode the hash boards.
5. Use of PoE function switches or routers are not allowed because the control board will be burnt.
6. Do not use touch the connectors of the control boards and fan as they are directly connected to the IC pins. Touching these connectors in the absence of electrostatic discharge will spoil IC which makes the miner malfunction.
7. Do not attempt to use a miner that appears to be damaged.
