Active Member
|
[China]
Address: 703-1, Building 33, 258 Xinbrick Road, Hi-tech Park, Caohejing Development Zone, Shanghai
Contact name:Julie
Ascentet Group Co.,Ltd |
|
|
Product specifications
| Application | In vitro qualitative detection of nucleocapsid(N) protein antigen from Covid-19 virus in human nasal (anterior) swab. |
| Main Composition | Test Cassette, Swab, Sample Extraction Bottle, Sample Extraction Tube, Tube Cap, Dropper, IFU |
| Function | Covid-19 Detection |
| Specimen | Nasal swab |
| Advantage | Easy to use with fast, accurate results |
| Usage | Home test |
Product Information
Coronaviruses are a large family of viruses which may cause illness in animals or humans. SARS-CoV-2 is an enveloped, single-stranded RNA virus of the β genus. The virus can cause mild to severe respiratory illness and has spread globally. The SARS-CoV-2 Antigen Test Kit (GICA) for home use is a rapid lateral flow immunoassay for the qualitative detection of SARS-CoV-2 directly from nasal (anterior) swab, without viral
transport media. The Kit contains all components required to carry out an assay for SARS-CoV-2.
HOW TO PERFORM THE TEST?
1. Remove a Test Device from the foil pouch by tearing at the notch and place it on a level surface.
2. Holding Extraction Reagent bottle vertically, add 10 drops (400μL) to the Extraction tube.
3. Insert the nasopharyngeal (and oropharyngeal) swab sample(s) into the extraction solution, then, mix the swab 10 times.
4. Remove the swabs while pressing against the solution tube in order to extract most of the specimen
5. Place the dropper cap and drop 3 drops (60~70μl) into the sample well.
6. Read the result in 10-15 minutes. Do not read results after more than 20 minutes.
Prior to testing, all reagents were returned to room
temperature.Testing shall be performed at room temperature.
I. Sample extraction (see Figure 1)
1. Add 400 L (about 10 drops) of sample buffer vertically to the
sample extraction tube and then insert the sample into the tube and
rotate against the inner wall about 10 times so that the samples in
the solution dissolve as much as possible.
2. Squsample q-tip along the inner wall of the extraction tube to
retain as much liquid in the tube as possible from the sample, then
removed and discarded.
3. Cover the dropper.
two.Test procedure (see Figure 2)
1. Remove the test card from the sealing bag.
2. Add 2 drops (about 80 L) of the treated sample extract to the
sample hole of the test card and start the timer.
3. The results were read after placing the test card for 15 minutes
at room temperature.The results were invalid after 20 minutes.
Schematic diagram of the test card result judgment:
Invalid ① result: the quality control line (C line) has no reaction
line, the detection is invalid, and the test shall be repeated.
② negative result: red ribbon, quality control line (C line) is in
color.
③ positive result: two red bands, detection line (T line) and
quality control line (C line) are in color.
