Home Companies NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD

Highly Efficient Armature Casting Machine Aluminum Liquid Die Casting Machine

Contact Us

[China]

Trade Verify

Address: 14-5,East Kemao Center, No.100 Xiangyun Road, Hi-tech district,Ningbo, China ,315040

Contact name:Herbert

NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Highly Efficient Armature Casting Machine Aluminum Liquid Die Casting Machine

Country/Region	china
City & Province	ningbo zhejiang
Categories	Filter Supplies

Product Details

Highly Efficient Armature Casting Machine Aluminum Liquid Die Casting Machine

The conventional rotor die casting machine requires about 3-5 operators for one machine. However, for our rotor die casting machine, one people can take care of more than one machines. It only takes one day for green hands becoming practician. It greatly reduced labor cost.The tooling change is also fast. it takes about 10min to change mould.

Unlike the conventional die casting machine, our machine doesn't need asbestine cup to keep the temperature and demould. The adpotion of automatic solid lubricating system and demould oil adding system makes the whole production smokeless , tasteless , pollution free and clean.

it adpots a C type structure. During production, there’s no need for operator to work under the projection area. Meanwhile, operator does not need to handling the heavy tooling which might occur body injury, and the machine has aluminium anti spatter design to prevent the aluminium liquid from spraying and cause injury.

This armature die casting machine is consisted of main machine and hydraulic electronic control system .

1.Main cylinder mould locking system

2. injection system

3. residual aluminum(sprue)pushing and conveying mechanism

4. automatic demould oil spraying

5.lower mould cooling system

6. lubricating system of puncher pin and molten aluminum container

7.Lower mould rotation system

8. Mould assembly system

9.Hydraulic system and electronic control system

10. Aluminum liquid loading system

11.Mechanical arm

12. Loading system

Technical Parameters

NO.	Item	Unit	90T
1,Main cylinder:
1	main cylinder mold lock force	KN	500
2	main cylinder mold lock travel	mm	400
2,Injecting cylinder:
1	Injecting cyliner travel	mm	150
2	Injecting cylinder injecting force	KN	300
3	Injecting force(Min-Max)	KN	70-300
4	capacity	L	20
5	aluminum depot OD(Max)	mm	75-90
6	punching head OD(Max)	mm	75-90
7	aluminum depot capacity(Max)	KG	1.8
8	Injection punching head travel distance	mm	55
9	cycle time	S	15-20
10	Rotor OD	mm	MAX85
11	Rotor stack height	mm	MAX90
3,Motor and pump:
1	Pump motor power	KW	7.5
2	Divider motor powder	KW	0.75
3	Oil pump (plunger pump)	L	40Y
4,Machine dimesion:
1	Main frame(LWG)	mm	18001800 2500
2	assembly of oil tank and electric appliance(LWG)	mm	15001000 900
3	turntable OD	mm	1000
5,Cooling pump specification:
1	Submersible pump power	KW	1.5
2	Submersible pump rate of flow	M3/H	5
3	Submersible pump water pressure	MPa	0.4
Remark: the max pressure of this machine is 25Mpa Submersible pump power : 220/380V Optional