|
[China]
Trade Verify
Address: No. 169, Wohushan Road, Daqi Subdistrict, Beilun District, Ningbo, China
Contact name:Herbert
Ningbo Nide Tech Co., Ltd |
|
Verified Suppliers
|
|
|
Rotor Automatic Aluminium Die Casting Machine With Water Cooling System
(1) Technical requirement
1.The die-casting machine is controlled by PLC.
2. Injection cylinder has three different injecting mode, slow injecting, fast injecting and secondary injecting. The injecting flow of fast injecting can be manually adjusted.
3. Machine is equipped with auto feeding device, cutting device and mold unloading device.
4.This machine has protector doors on all sides. It is pneumatic protector door in the fore-and-aft direction.
5. Machine is equipped with water cooling system.
6. Each machine is equipped with two pieces of stuff canister, which is customized.
(2) Parameter
| Specification | 100T |
| mold clamping force | 1000Kn |
| Oil cylinder travel | 480mm |
| Max opening | 800mm |
| Injecting force | 400Kn |
| injection cylinder travel | 180mm |
| Working station area | 680x820mm |
| injection chamber OD | 60—120 mm |
| Motor power | 15—4 KW |
| Oil pump model number | CY—63 |
(3) Machine feature
1.Rapid mould closing
2. With feeding, cutting and mold unloading device
3. It can once make four products if the rotor outside diameter is within 40mm.
