Active Member
|
[China]
Address: Economics&Development Zone, Pudong District, 200008, Shanghai, China.
Contact name:Seeker Xu
Shanghai APS Eco-tech Co., Ltd |
|
|
THERMOSTATIC MIXING VALVE WITH CHECK VALVE:
DN32-DN100 thermostatic valve has no built-in check valve;
Inconsistent hot and cold water pressures, check valves should be
installed on the side with low pressure;
If you can't judge which side the pressure is low, install a check
valve on both sides;
If the cold water is not pressured tap water, a booster pump is
also required at the cold water end.
| Model | AP-DN50M-4 |
| Body: | Stainless steel |
| Shutter: | PPO |
| Springs: | Stainless steel |
| Seals: | EPDM |
| Temperature setting range: | 35-45 C or 50--60C |
| Hot water inlet temperature range | Below 100 ºC |
| Cold water inlet temperature range | 5-29 ºC |
| Temperature stability: | +/-3 ºC |
| Hydrostatic pressure | 10bar |
| Max working pressure(dynamic): | 5bar |
| Working pressure: | 0.03-1Mpa |
| Ideal working pressure | 0.1-0.5Mpa |
| Connections: | 2",M |
| Flow rate (1 kg pressure) | 250 L/min |
| Model | AP-DN80M-5 |
| Ideal working pressure | 0.1-0.5Mpa |
| Cold water inlet temp. | 4-29 ℃ |
| Hot water inlet temp. | 50-95 ℃ |
| Mixed water outlet temp. | 40-50 ℃ customized |
| Flow rate (1 bar pressure drop) | 833.3L/min |
| Temp accuracy | ±2℃ |
| Body material | Stainless steel |
| Thread | G 3″ Male Thread |
| Standard | QB2806-2017 |
