Active Member
|
[China]
Address: Maanshan City,Anhui Province,China.
Contact name:sylvia Wang
Anhui Aoxuan Heavy Industry Machine Co., Ltd. |
|
|
Custom Table Size 1000*1000MM 150 Ton Air Clutch Mechanical Punching Press Machine
Main Features:
1. J23 series Open Eccentric Presses is a general-purpose presses,
suitable for forming, blanking, punching, bending and other cold
stamping process.
2. C-frame Casting fuselage,maximum rigidity and minimum deflection
for accurate parts and long tool life. body can be tilted, , high
rigidity and less deformation Compact. Thick plates and large
columns provide you with the stable platform you need for your
demanding application.
3. The Machine use Rigid rotated bond clutch rigid and well
supported. The clutch gives continuous strokes for mass production.
4. Crank shaft is made of special alloy steel machined to close
accuracy and fitted in bronze bushes for smooth working, longer
life & accuracy.
5. Properly sized flywheel, is made of high grade cast iron, for
storing and releasing adequate energy for the pressing operations,
and properly balanced for smooth running.
6. Gear are of steel cast or fabricated. Gear teeth are generated
by precision hobbing machine.
7. Machine is with both hands button and foot switch control:
anti-tie down, non-repeat controls with ring guards; conforms to
OSHA.
8. Protective fence and the safety interlock to ensure the
operation safety. Have a movable single-hand pedal switch,easy to
operate.
| Model | J23-6.3T | J23-12T | J23-16T | J23-25T | J23-40T | J23-63T | J23-80T | J23-100T | J23-125T |
| Nominal Pressure(KN) | 63 | 120 | 160 | 250 | 400 | 630 | 800 | 1000 | 1250 |
| Nominal Pressure Stroke(mm) | 1.5 | 2 | 2 | 2.5 | 4 | 4 | 5 | 5 | 5 |
| Slide stroke(mm) | 40 | 50 | 60 | 70 | 100 | 100 | 120 | 120 | 140 |
| Stroke frequency (times/min) | 150 | 140 | 100 | 70 | 55 | 56 | 45 | 50 | 40 |
| Die Set Height (mm) | 120 | 130 | 170 | 200 | 240 | 275 | 300 | 320 | 340 |
| Die Height Adjustment | 30 | 40 | 40 | 40 | 56 | 63 | 70 | 80 | 90 |
| Worktable Size ( front-back) (mm) | 210 | 220 | 290 | 350 | 400 | 450 | 480 | 580 | 700 |
| Worktable Size ( Left-Right)(mm) | 350 | 370 | 460 | 560 | 680 | 680 | 780 | 910 | 1100 |
| Max Tilt Angle | 20 | 20 | 30 | 15 | 25 | 25 | 25 | 20 | 20 |
| Die Handle Hole Size (mm) | 25 | 30 | 35 | 40 | 50 | 50 | 60 | 60 | 60 |
| Thickness of the Worktable | 30 | 35 | 45 | 50 | 70 | 80 | 90 | 110 | 120 |
| Worktable Hole Diameter | 70 | 90 | 120 | 130 | 135 | 140 | 160 | 160 | 170 |
| Power(KW) | 0.75 | 1.5 | 1.5 | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 |
| Column Spacing (mm) | 140 | 170 | 190 | 240 | 250 | 280 | 320 | 390 | 400 |
| Dimensions (mm) | 400*500*1300 | 600*530*1500 | 760*650*1600 | 900*700*2000 | 1400*1000*2300 | 1700*1150*2500 | 2000*1300*2650 | 1950*1400*2850 | 2300*1500*3000 |
| Throat Depth (mm) | 120 | 130 | 170 | 190 | 250 | 260 | 290 | 330 | 330 |
Details:
Intergrally forged frame, never deformation.
Adopts crankshaft-type structure, the crankshaft is made by 45#
forged steel, significantly improving the crankshaft service life.
All copper tile is used reduce the operation friction and wear to
improve the machine service life.
Forged steel gear with good wear-resistant property and longer
service life.
Brake belt is made by 16Mn material and equipped with friction
block for providing reliable and controllable brake force, and with
good hydraulic transmission and cooling capacity to avoid hydraulic
failure and recession caused by overheat.
Custom Table Size 1000*1000MM
T type slot, easy to install and uninstall molds,It is firmly fixed
and will not move.Table size can be customized.
Both-hands operation buttons to ensure the operators' safety.
Air Clutch
Different from traditional mechanical punch machine ,our machine
can be equipped with the machine, with this air clutch the machine
to stop at any time at any position.
The slider is integrally cast, using nodular cast iron, and then connected to the connecting rod after being milled by a milling machine. After the slider is installed, Carry out parallelism and perpendicularity test and then fine-tuned and corrected, and Corrected in accordance with the Japanese first-class accuracy standard.
Use Chinese famous brand electrics to ensure the machine service life.
Safety light on our machine which is Convenient to use for lighting at night working.
Crankshafts are all high-quality crankshafts made of 42CRMo steel after high temperature forging. the surface is quite smooth. so that make sure the lower friction resistance , and the lower noise. It is lubricated. The press work more smooth.
