Active Member
|
[China]
Address: NO.27,Jinlanling Street,Taigongling Village Dongguan 523829,Guangdong,China
Contact name:Eric
Aolittel Technology Co.,Ltd |
|
|
350 V 3 Electrode Gas Discharge Tubes SMD GDTs 6x8mm 3 Pole Gas Plasma Arrestors
Features
■ Provide ultra-fast response to surge voltage from slow-rising surge of 100V/s to rapid-rising surge of 1KV/μs.
■ Stable breakdown voltage.
■ High insulation resistance.
■ Low capacitance (≤2pF)
■ High holdover voltage
■ Large absorbing transient current capability.
■ Micro-Gap Design
■ Size: 6.0mm*8mm
■ Storage and operational temperature: -40℃ ~ +85℃
■ Meets MSL level 1, per J-STD-020
■ Safety certification: UL: E244458
General
AOLITTEL's GDTs (Gas Discharge Tubes) are placed in front
of, and in parallel with, sensitive telecom equipment such as
power lines, communication lines, signal lines and data
transmission lines to help protect them from damage caused by
transient surge voltages that may result from lightning
strikes and equipment switching operations. These devices do
not influence the signal in normal operation. However, in the
event of an overvoltage surge, such as a lightning strike, the
GDT switches to a low impedance state and diverts the energy
away from the sensitive equipment.
Our GDTs offer a high level of surge protection, a
broad voltage range, low capacitance, and many form
factors including new surface mount devices, which makes
them suitable for applications such as Main Distribution
Frame (MDF) modules, high data-rate telecom applications
(e.g. ADSL, VDSL), and surge protection on power lines. Their
low capacitance also results in less signal distortion. When used
in a coordinated circuit protection solution with PolySwitch
devices, they can help equipment manufacturers meet stringent
safety regulatory standards.
Applications
■ Repeaters, Modems.
■ Telephone Interface, Line cards.
■ Data communication equipment.
■ Line test equipment
Part Number Code
Gas Discharge Tubes - SE3 Series
SE33 - 230X F
SE3 Series: SE3:ф6*8 SE8:ф8*10
3 : Lead Type: 0=SMD 3=Thrust
230X : DC Line Voltage: 90X=90V 230X=230V 102X=1000V
F: Package F=With Fail-Short mechanism
BENEFITS
• Helps provide overvoltage fault protection against damage caused by high energy surges
• Suitable for use in sensitive equipment due to impulse sparkover response
• Suitable for high-frequency applications
• Highly reliable performance
• New surface-mount devices for automated manufacturing
Installation for Gas Discharge Tubes
Care should be taken when installing GDTs equipped with fail-short mechanisms into arrester magazines, printed circuit boards, etc. Too much downward pressure may force the short circuit spring through the thin insulation tube creating a shorted condition.
Solder Reflow Recommendations for Surface-mount GDT Devices
Surface-mount GDTs can be soldered using standard Pb-free reflow profiles.
Dimensions
33 Type |
33-F Type
|
30 Type
|
Electrical Characteristics
| Part Number (DIP) | Part Number (SMD) | DC Spark-over Voltage(V) | 1KV/μs (V) | 8/20μs (1 time) (KA) | DC Holdover Voltage(V) | AC50Hz 1sec(A) | Insulation Resistance (GΩ) | Capacitance 1MHz(PF) | Impulse Life(10/1000μs)@100A |
| SE33-75X | SE30-75X | 75±20% | 750 | 5 | 25 | 5 | 1 | 2 | 200 |
| SE33-90X | SE30-90X | 90±20% | 750 | 5 | 50 | 5 | 1 | 2 | 200 |
| SE33-100X | SE30-100X | 100±20% | 750 | 5 | 50 | 5 | 1 | 2 | 200 |
| SE33-110X | SE30-110X | 110±20% | 750 | 5 | 50 | 5 | 1 | 2 | 200 |
| SE33-150X | SE30-150X | 150±20% | 800 | 5 | 100 | 5 | 1 | 2 | 200 |
| SE33-230X | SE30-230X | 230±20% | 800 | 5 | 100 | 5 | 1 | 2 | 200 |
| SE33-250X | SE30-250X | 250±20% | 800 | 5 | 100 | 5 | 1 | 2 | 200 |
| SE33-300X | SE30-300X | 300±20% | 800 | 5 | 100 | 5 | 1 | 2 | 200 |
| SE33-350X | SE30-350X | 350±20% | 850 | 5 | 100 | 5 | 1 | 2 | 200 |
| SE33-470X | SE30-470X | 470±20% | 950 | 5 | 250 | 5 | 1 | 2 | 200 |
| SE33-600X | SE30-600X | 600±20% | 1300 | 5 | 250 | 5 | 1 | 2 | 200 |
| SE33-800X | SE30-800X | 800±20% | 1500 | 5 | 250 | 5 | 1 | 2 | 200 |
Recommended Soldering Conditions
Wave Soldering
|
Reflow Soldering
|
Packaging
Axial Packing (Bulk)
SMD Packing (Tape & Reel)
Smart Home Application
Intelligent household appliances , mixing the Internet technology
and IT technology, functioning with the smart controlling, Infrared
sensing, RF automatic identification and automatic scanning, is
common and popular in people’s daily life. Aolittel Electronics
will provide the electronic components such as ceramic gas
discharge tube, transient voltage suppressor and ESD
suppressor,which are widely used in the this field
