HEFEI VINNCOM S&T CO., LTD. |
Verified Suppliers
|
|
5 Watts RF Dummy Load Termination N Male 0-3.8GHz 0-4GHz
Dummy load/Low PIM Termination/Load is a device used to stop some
port as a RF power load when testing other RF products or stop the
RF power radiation when some port is not used at present , the
theory is matching similar impedance to real device that will be
connected to the RF System. Dummy load also will absorb some power
and getting heating when RFA system works, so when use dummy load
to stop some port in the RF system, pay attention to the power
handling , otherwise may be over-heated .
Vinncom will supply dummy loads in different power for different
frequency range, it can be up to 67GHz .
For some RF system , it will need good PIM value, vinncom can
supply -130dbc,-140dbc and -165dbc PIM .
Part Number | VN-LD-4G-5W-ONm |
Operating Frequency ( GHz ) | 0-4 |
Impedance ( Ohm ) | 50 |
VSWR | ≤1.20 |
IM3 (dBc @ 2×34dBm) | -110 / -120 |
Application | Indoor & Outdoor |
Degree of Protection | IP65 |
Operating Temperature ( ℃ ) | -40 ~ + 80 |
Interface | N Male |
Handling Power (Watt, max) | 5 |
Dimension (mm)(L×W×H, excl connector) | 30 × Φ20 |
Net Weight (g) | 35 ± 10 |
Packing Dimensions (mm,L×W×H) | 41 × 41 × 55 |
Packing Carton Size (mm,L×W×H) | 220 × 220 × 220 |
ROHS Compliance | Yes |
Revision | R1 |
Date | 27-Sept -2020 |