Industrial Aluminum Extrusion Press 1000T Aluminium Extruder Horizontal

Industrial Aluminum Extrusion Press 1000T Aluminium Extruder Horizontal

一.Description

Aluminum extruder is a four-column horizontal type hydraulic pressing machine specially designed for extruding civil aluminum profile and industrial profile.

Technical Parameters:

1) Billet size:ф127mm, length 660mm.

2) Extrusion capacity

         Diameter of main cylinder plunger: 750mm

         Diameter of side cylinder plunger: 180mm*2

         Diameter of container plunger: 160mm*4

         Diameter of shear plunger: 160mm

     Total extrusion strength: 220kg/cm²          1033ton

     Main cylinder extrusion: 220kg/cm²           927 ton

     Side cylinder extrusion: 220kg/cm²           106ton

     Container lock-up: 200/kg /cm²                 51 ton

     Shear: 160/kg/ cm²                                    32 ton

 3) Theory speed

  Main cylinder fast forwarding speed: 231mm/sec

  Main cylinder fast draw-back speed: 360mm/sec

Extrusion speed: 0~12mm/sec

Container lock-up: 185mm/sec

Container open: 128mm/sec

Shear down: 162mm/sec

Shear up: 266.7mm/sec

Under the circumstance of no billet, every extrusion circle is less than 16~20seconds.

4) Die size:

       Outer diameter ф255mm, length:235mm

5) Machinery outer dimension: Length7500mm* width3000mm *height3800mm

6) Discharge gate siz: Φ160㎜×190㎜

7) Heat exchanger: 25㎡

8) Total weight: 48Ton.

1100UST Press Specification

(1) oil pump

       Main oil pump: A7V-170L ( Lihao Hydraulic) *2sets

       Auxiliary pump: YBE-200/125L (Zhejiang Yongling) 2sets

     (2) hydraulic parts:

       The high-pressure hydraulic parts are from Rexroth, another parts are from Taiwan.

     (3) motor:

       Main motor: YE3- 280M-6 -65KW *1 sets (6极)

       YE3- 280S-4 -75KW *1 sets (4极)

      Pressure leading motor: YE2-132S-6-3KW 1set

      Pressure leading pump : PV2R1-10RAF1 1set

      The container’s temperature: 380-430℃

     (4) Material:

       Main cylinder: forging steel

       Main plunger: chilled casting iron

       Front plate: 35# casting steel

       Dies sliding base: 45# forging steel

       Butterfly plate: 35# casting steel

       Connecting pipe: 45# forging steel

       Temperature conservation part: 35# casting steel

       Container: 5crmnmo

       Container liner: H13 forging

       Stem: H13 forging

       Extruding part: H13 forging

       Bottom shelf: 35# steel and steel plate welding

(5) Electrical Parts:

PLC: MISBUSHI FX3U-128MR,MT-8102IP touch screen, displaying press situation and extrusion speed Equipped with automatic hydraulic digital controlled system, this press has functions of :

        a) Display of set speed and actual speed

        b) Same speed controlled and speed changed control

        c) Display of set electric current and actual electric current

        d) Actual position, speed changed position and after extrusion position

        e) Switches group position setting

        f) Break-through pressure testing

        g) Timing showing parameters.

        h) System working parameters setting

B.This press is equipped with position transducer and data display and adjustment. Under automatic situation, extrusion speed can also be adjusted.

AC contactor: MISBUSHI

stroke switch: Tend,Taiwan

Relay: Basel, UK