Farm pig Feed 0.1TPH 1TPH Flat Die Pellet Machine

0.1-1t/H Farm Use Chicken Poultry Feed Flat Die Pellet Machine
 

Introduction for Chicken Poultry Feed Flat Die Pellet Machine:

This chicken poultry feed flat die pellet machine is mainly used for producing feed pellets for chicken, cow, sheep, rabbit, duck, pig, shrimp and making other industrial pellets. This chicken poultry feed flat die pellet machine is widely used for industry, organic fertilizer and wood pellet.

Pellet size is available from 2mm to 8mm.

Pellets are formed through pressing, which can kill some common pathogenic microorganisms and parasites to prevent some diseases.

As the moisture of pellet is low, it is easy for storage and can keep its original shape in water, which increase the utilization rate of feed greatly.

Structure of Chicken Poultry Feed Flat Die Pellet Machine:

Main Parameters of Chicken Poultry Feed Flat Die Pellet Machine:

Main Features of Chicken Poultry Feed Flat Die Pellet Machine:

1. Simple structure, wide application range, small floor area and low noise.

2. Powder feeding, no need of adding water. The final feed pellets moisture is low and easy for storage.

3. The results showed that the pellet feed can improve the digestion and absorption of nutrients, and the pathogenic microorganisms and parasites can be killed during pelletizing. The feed pellet is suitable for raising rabbits, fish, ducks and experimental animals.

4. The die of chicken poultry feed flat die pellet machine has die hole form 1.5 ~ 20 diameters, which is suitable for granulation of different materials and obtains the best results.

Application of Chicken Poultry Feed Flat Die Pellet Machine:

This series chicken poultry feed flat die pellet machine is the most ideal equipment to make feed pellets for home use or small farms.

FAQ:

1. Why the Pellets discharged have much powder or no pellets discharged?

A: There are usually 3 cases for causing this problem:

1). Moisture of material is too low.

2). Moisture of material is too high.

3). Too much crude fiber in raw material.

The ways to solve this problem are:

1). Increase water content.

2). Reduce water content.

3). Add more sticky powder.

2. Why the capacity becomes more and more lower?

A: There are usually 2 cases for causing this problem:

1). Large gap between roller and die plate.

2). Moisture of material is too low.

The way to solve this problem:

1). Adjust the gap between roller and die plate. 2). Increase the water content of material.

3. Why are the pellets too hard and bright?

A: Moisture of material is a little low will cause this problem, add more water for the powder material.

4. Why the pellets edge is soft and have rough surface?

A: There are 2 cases for causing this problem:

1). Moisture of material is not suitable. 2). New die for using.

The way to solve this problem:

1). Reduce or increase the moisture of material. 2). Polish the die by using oil containing material.

5.Why the pellet machine are suddenly suffocated?

A: Big and hard object or metal enters the gap between roller and die plate will cause this problem, remove the objects to solve it.