High Temperature Feed Pellet Cooler Wood Pellet Cooler 30t/H - 20t/H

High Temperature Feed Pellet Cooler Wood Pellet Cooler 30t/H - 20t/H

Introduction of Counterflow Feed Pellet Wood Pellet Cooler:

This series counterflow feed pellet woode pellet cooler adopts split type air feeder, which is closed to prevent the pellet mill with high temperature and high wet steam into the cooler then affect the cooling effect, and prevent the wind into.

Using adjustable ling conical dispersion device, the material can maximize evenly spread out in the bin. Advanced material level control, high degree of automation. May apply unmanned, special designed to slide valve type discharge mechanism, Uniform discharge, reliable work, cooling efficiency is very high.

Main Features of Counterflow Feed Pellet Wood Pellet Cooler:

1. The high temperature and humidity particles are cooled by counter-current cooling principle, which avoids the sudden cooling phenomenon caused by the direct contact between cold air and hot materials, thus preventing the surface cracking of particles.

2.  The cooling effect is remarkable due to the use of closed air feeding and large air intake area.

3. Adopting the turning plate layout structure, the movement is stable, reliable, the residue is small, and the finished product is not damaged;

4. The octagonal section of the cooling silo eliminates the dead angle of cooling, which is low in energy consumption and easy to operate.

5. After cooling, the temperature of finished product is not higher than room temperature 3 ~5℃

6. It is suitable for cooling various granular materials, such as granulating materials, expanding materials, sheeting materials, etc.

Main Parameters of Counterflow Feed Pellet Wood Pellet Cooler: