Active Member
|
[China]
Address: Fu Zhao Village，Guang Chuan Town, Jing County, Hengshui City, Hebei Province
Contact name:Anne Wang
Hebei Changtong Steel Structure Co., Ltd. |
|
|
newest high quality angle steel hot dip galvanized guyed wire tower for wind measuring tower
The composition of wind measuring tower guyed wire tower: including tower base (1), tower column (2), cross bar, inclined bar (3), anemometer support (4), lightning rod (5), stay wire
Anemometer tower is a tower structure used to observe and record the airflow movement near the ground. In the past, it was mostly built by meteorological and environmental protection departments for meteorological observation and atmospheric environment monitoring.
The Guyed Wire tower is set up in the wind farm site, which is mostly of quilted structure and cylindrical structure. It is reinforced by steel strand cable, and the height is generally 10-150m. Anemometer, wind vane, temperature and air pressure monitoring equipment are installed at different heights of the tower. The wind condition of the site can be continuously observed all day, and the measured data are recorded and stored in the data recorder installed on the tower.
Structure design of anemometer tower: there are two common structure forms of anemometer tower: self-supporting type and guyed type. The lower part of the self-supporting anemometer tower is wide, the material consumption of the tower is relatively large, and the requirements for the foundation are also high; the guyed anemometer tower has reasonable stress, high reliability, small section of the tower, and small material consumption of the tower, but there are many guyed foundations, and the construction process is complex.
1. Products
Triangular telecom guyed wire tower
2. Standard
Bespoke Telecom tower could be fabricated as per GB, EN or ASTM standard with high quality.
3. Technical Data
| Design | ||||
| 1. Design Code | ANSI/TIA-222-G/F | |||
| 2. Design Wind Speed | Up to 250 km/h | |||
| 3. Allowable deflection | 0.5 degree @ operational speed | |||
| Structure Steel | ||||
| High Tensile Steel | Mild Steel | |||
| 4. Grade | GB1591: Q345B, Q345C,Q3455D | GB700: Q235B, Q235C,Q235D | ||
| EN10025: S355JR, S355J0, S355J2 | EN10025: S235JR, S235J0, S235J2 | |||
| ASTM A572 Gr50 | ASTM A36 | |||
| 5. Tension strength (Mpa) | 470~630 Mpa | 360~510 Mpa | ||
| 6. Yield strength (t≤16mm) (Mpa) | 355 Mpa | 235 Mpa | ||
| 7. Elongation (%) | 20 | 24 | ||
| 8. Sharpy V-notch Test | 27J(20°C) | Q345B/S355JR | 27(20°C) | Q235B/S235JR |
| 27(0°C) | Q345C/S355J0/A572 Gr50 | 27(0°C) | Q235C/S235J0/A36 | |
| 27(-20°C) | Q345D/S355J2 | 27(-20°C) | Q235D/S235J2 | |
| Bolts & Nuts | ||||
| 9. Grade | Grade 4.8, 6.8, 8.8 | |||
| 10. Standards for mechanical properties | ||||
| 10.1 Bolts | ISO 898-1 | |||
| 10.2 Nuts | ISO 898-2 | |||
| 10.3 Washers | ISO 6507-1 | |||
| 11. Standards for Dimensions | ||||
| 11.1 Bolts | DIN7990, DIN931, DIN933 | |||
| 11.2 Nuts | ISO4032, ISO4034 | |||
| 11.3 Washers | DIN7989, DIN127B, ISO7091 | |||
| Marking | ||||
| 12. Method of marking of the members | Hydraulic Press Stamping | |||
| Welding | ||||
| 13. Method | CO2 Shielded Arc Welding & Submerged Arc Welding(SAW) | |||
| 14. Standard | AWS D1.1 | |||
| Galvanizing | ||||
| 15. Galvanization standard of steel sections | ISO 1461 or ASTM A123 | |||
| 16. Galvanization standard of bolts and nuts | ISO 1461 or ASTM A153 | |||
| Capacity | ||||
| 17. Maximum Production Capacity of Steel Tower per annum | 100,000 TON per annum | |||
| 18. Maximum Capacity of Galvanizing Plant per annum | 100,000 TON per annum | |||
| Test | ||||
| 19. Factory test | Tensile test,Elements analysis, Sharpy test(impact test), Cold Bending, Preece test, Hammer test | |||
4. Quality control
100% inspection: Each member will be checked by our QC team to ensure all members are qualified before delivery.
5. Package
Set-wisely packing or member-wisely packing as per client's requirements.
Tower members: One steel tower is separated into several bundles.
Bolts: Packing material is robust nylon bag or steel drum.
6. Experiences
Our products have been exported to more than 40 countries, such as Finland, Macedonia, Colombia, Venezuela, Chile, Cuba, Myanmar, South Korea, Kazakhstan, Pakistan, Philippines, India, Indonesia, Ethiopia, Sudan, Rwanda, Ghana, Benin, Nigeria, South Africa, UAE and Bahrain etc.
7. Our Commitment and target
Four ZEROs---Zero Quality Defect, Zero Quantity Shortage, Zero Delivery Delay, Zero Client Complaint
Our Workshop
Our Warehouse
Our Team
