1.2mm Thickness T5-T6 Aluminum Window Profiles Set For Building Materials

T5-T6 Colombia Market Aluminium Extruded Profiles Set For Casement Window Door Building Materials

Aluminium Windows Doors Features:

1. Air tightness: to be simple, it refers to the ability of high-end aluminum alloy doors and windows to prevent air penetration when they are normally closed. There are 8 levels in total;

2. Water tightness: the ability of aluminum alloy doors and windows to prevent rainwater penetration in case of wind and rain when they are normally closed, which is divided into 6 levels;

3. Wind pressure resistance: the performance that the external doors and windows will not be damaged under the action of wind pressure; For example, it is not easy to crack, profile damage, glass damage, adhesive failure, and hardware looseness. It is divided into 9 levels;

4. Thermal insulation: that is, the K value in the terms of doors and windows;

5. Daylighting: the brightness of the light transmitted through the aluminum alloy doors and windows, which is the performance of collecting sunlight;

6. Sound insulation and noise reduction: reduce the ability of sound transmission from the sound source to the listener, which is divided into 6 levels;

7. Performance of anti condensation factor: Generally speaking, it refers to the ability of aluminum alloy doors and windows to resist frost, condensation and other phenomena. People with high requirements for such performance are mostly in the north;

8. Sunshade performance: the ability to block and resist the sun's light and heat. Most people with high requirements for this kind of people are in the south where the sun is very abundant.

Specifiaction of Profile:

Certificate:

1: Guangdong famous brand

2: The ISO9001 quality management system certification

3: ISO14001 environmental management system certification

4: OHSMS18001 occupational health and safety management system certification,etc.

Characteristics:

The density of aluminum profiles is only 2.7 g/cm3, which is about a third of the density of steel, copper or brass (7.83 g/cm3, 8.93 g/cm3). In most environmental conditions, including air, water (or brine), petroleum chemistry, and many chemical systems, aluminum shows excellent resistance to corrosion.

Electrical conductivity

The aluminum profile is often chosen because of its excellent conductivity. On the basis of weight, aluminium is nearly twice as conductive as copper.

Thermal conductivity of rate

The thermal conductivity of aluminum alloy volume rate is about 50-60% of copper, the manufacturing heat exchangers, evaporators, heating appliances, cooking utensils, as well as the automobile cylinder head and radiator are favorable.

The ferromagnetic

The aluminum profile is non-ferromagnetic, which is an important feature for the electric and electronic industries. Aluminum profiles are not self-igniting, which is important for applications that involve loading and unloading or touching inflammable and explosive materials.

Can machine processability

The machinability of aluminium profile is excellent. In deformation and aluminum casting aluminum alloy, as well as in the alloy after output with the various states, the change of the machining features is quite big, this will require a special machine tool or technology.

formability

Specific tensile strength, yield strength, malleability, and corresponding processing hardening rate dictate the change in the amount of deformation allowed.

Corporate Introduction:

Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10 (Sanjiang market) of Leping Town, Sanshui District, Foshan. The company was founded in 1997. It is a comprehensive and large-scale aluminum profile enterprise integrating the research and development, production and sales of aluminum alloy profiles. The company is leading the "Hong Ying" brand. Strong comprehensive strength and excellent service make Yong long "Hong Ying" sell well all over the country and exported to Southeast Asia, Europe, South America and many other countries.

The company has 900 employees, including 120 high and intermediate engineering technology and management personnel, with advanced and perfect design, production, testing and testing methods as well as perfect sales network and after-sales service system. The products sell well in more than 10 national and foreign ports, Australia and Taiwan areas.

Corporate Advantages:

1.20 years' experience and advanced equipment

2.Customize: We can manufacture according to your size and shape of such aluminum profile;

3.Strong production capacity - 28 extrusion lines, 50,000TONS/Year

4.One Stop Service Specialized in mould, extrusion, anodizing, powder coating, wood grain and Processing;

5.Shortest Delivery , competitive prices and excellent service

Photos:

FAQ:

Q – What is the average lead time for pre production samples?

A – Our average lead time is normally 7 days for making new samples and 7 days for testing , totally need about 14days.

Q – What is the average lead time for mass production?

A – Our average lead time is delivery within 20-30 days after receive deposit and and moulds/samples are passed.

Q – What is CAD?

A – CAD stands for “computer assisted design” and it is a 3-D program that is used by our clients to provide our technicians with a three-dimensional example of the custom shape that they want made at GUANGDONG YONGLONG ALUMINUM.

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium profiles?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.