High Strength Aluminum Heatsink Extrusion Profiles For Led Lighting

High Strength , Good Heat Insulation , Good Rigidity, Large Light Area

1.Introduction

   The main body of the thermal insulation aluminum alloy is aluminum material, and the plastic section cavity is used in the middle section of the section make the heat breaking material. This innovative structural design takes into account the advantages of two materials, namely plastic and aluminum alloy, and meets various requirements of decorative effect, door and window strength and aging resistance. The three seal structure of the doors and windows can be realized by the insulated and broken bridge aluminum profile, the water vapor cavity is separated reasonably, the isostatic balance of gas and water is successfully realized, and the water tightness and tightness of the doors and windows are greatly improved. The air tightness of the insulated aluminum door and window is better than any aluminum and plastic window. It can ensure the dust free in the windowsill and floor in the area with large wind sand. It can guarantee the residents of 50 meters on both sides of the highway not to be disturbed by noise; and the thermal conductivity is 40 to 70% lower than that of the non insulated   aluminum alloy profile and windows.

2.Features of  Aluminum

1.Corrosion resistance

Under most environmental conditions, aluminum can display excellent corrosion resistance, including air, water (or brine), petrochemistry and many chemical systems.

2.Conductivity

On the basis of equal weight, the conductivity of aluminum is nearly two times that of copper.

3.Thermal conductivity rate

The thermal conductivity of the aluminum alloy is about 50-60% of the copper, which is beneficial to the manufacture of heat exchangers, evaporators, heating appliances, cooking utensils, and the cylinder head and radiator of the car.

5.Nonferromagnetism

Aluminum profiles are non-ferromagnetic, which is an important feature for the electrical industry and the electronics industry. Aluminum profiles are not self ignition, which is important for the application of loading and unloading or contact with flammable and explosive materials.

6.Machinability

The machinability of aluminum profiles is excellent. In all kinds of deformed aluminum alloys and cast aluminum alloys, and in the various states after these alloys are produced, the change of machining characteristics is quite large, which requires special machine tools or technology.

7.Formability

The specific tensile strength, yield strength, ductility and the corresponding work hardening rate govern the variation of allowable deformation.

8.Recovery

Aluminum has very high recyclability, and the properties of recycled aluminum are almost the same as that of native aluminum.

3.Company introduction