Guangdong KLUK Aluminum Building Technology Co., Ltd |
Verified Suppliers
|
|
Introduction of Sliding Windows:
Narrow side windows are doors of smaller width. Compared with the traditional sliding door, the frame is more aesthetic, because it is more slender, which also saves more space. The material is mainly aluminum alloy or glass, and the style is also divided into flat open and push-pull, so the selection can still meet everyone's needs.
This narrow side sliding door has a lower track design than the previous sliding door, and even has a trackless design, which makes it easier to clean and clean. If there are old people and children at home, tripping can also be avoided. Sliding doors adopt embedded design, which improves the sealing, thermal insulation and sound insulation effects of doors and windows.
After continuous improvement and upgrading, the thickness and hardness of the narrow side sliding door have been improved to a certain extent, which not only reduces the self weight, but also enhances its own stability. The material of aluminum alloy makes the doors and windows more resistant to damage and corrosion. It is usually a place with small space, such as our balcony, study, cloakroom or storage room.
It can help us save space to a large extent and improve the overall space utilization. If your home is not very large, this sliding door is a good choice for you. In the process of our modern home decoration, many people will choose sliding doors because they can greatly reduce the land area.
Fixed Part:
Fixed windows are fixed to the wall without any closing or opening operation. In general, they are provided to transmit the light into the room. Fully glazed shutters are fixed to the window frame. This type of window is used in situations where light or vision alone is needed as no ventilation is possible through fixed window.Round Sliding Windows.Aluminium Round Top Sliding Windows
In the process of using the push and pull window, there are
disadvantages and advantages, but the relative advantages are
larger than the disadvantages, so the use range is relatively wide.
Generally, windows must have wind pressure resistance, that is to
say, they can resist the general wind, and there is a certain
degree of tightness. Otherwise, when it rains outside, it will rain
in. Another is that the windows should be air tight, and the indoor
temperature can be protected or the insulation effect can be
achieved when it is needed. Push and pull windows are similar to
other price windows, and push and pull windows are easy to use, so
the market scope is much more than other windows.Round Sliding
Windows
Performance | Parameter | National Standard |
Wind Load Resistance | 4.5<=p3>=5.0 | level 9 |
Air Tightness | 2.5<=q1<=2.0 | level 7 |
Water Tightness | 350<=△p>=700 | level 6 |
Thermal Insulation | 3.5>k>=3.0 | level 5 |
Sound Insulation | 20=<Rw+Ctr<25 | level 3 |
|
Glass Specification:
Single-Pane Glass: Simple and Cost Efficient
Due to lower costs, single-pane windows are great for garages,
tool-sheds, and other non-heated outbuildings. Also, when
single-pane windows get broken, they are less expensive to repair
as you only need one pane of glass. If energy efficiency is a
concern, dual- or triple-pane glass options are a wiser choice.
Dual-Pane Glass: The New Standard
Double glazing consists of two glass panes which are joined
together usually through an aluminium spacer or a warm-edge spacer
(polyamide profile) and sealed around with a special glue. They
offer significantly higher thermal insulation and sound insulation
compared to single glazing in which only one glass pane is applied.