Guangdong KLUK Aluminum Building Technology Co., Ltd |
Verified Suppliers
|
|
KNL70 Series Internal Adjustable Grey Aluminium Or Glass Single Hinged Louver Louvered Doors
Installation of aluminum louver doors:
Installation method of louver 1
Measure the size of the outer frame: measure the width of the outer
frame of the window from left to right. The widest size at the top,
middle and bottom of the window is the suitable width of the outer
frame. Height measure the height of the outer frame of the window
from top to bottom. The maximum size of the left, middle and right
of the window is the suitable height of the outer frame.
Installation method of louver 2
Measure the size of the inner frame: measure the width of the inner
frame of the window from left to right. The minimum width of the
upper, middle and lower windows is further reduced by 1cm, which is
the suitable width of the inner frame. Height measure the height of
the inner frame of the window from top to bottom. The dimension of
the minimum height of the left, middle and right of the window is
the suitable height of the outer frame. Determine that the window
depth is sufficient for the free movement of the louver blades, and
the window depth is different for different louver installation
methods. 8cm depth is required for fixed or flat installation.
During push-pull installation, not only the blade width of the
product, but also the number of layers of the installed product
shall be considered. Generally, the two-layer push-pull shall
ensure that the blade movement needs 15cm depth, and the single
leaf needs 10cm depth; 10cm depth shall be reserved for folding
installation.
Installation method of louver 3
Installation method of louver: fixed method. If the louver is
fixed, it will bring inconvenience to cleaning the window glass.
Generally, fixed installation is not selected. The flat opening
mode has the characteristics of good sealing, and is suitable for
the installation of small windows or single or two windows. The
push-pull mode takes up less space and is suitable for the
installation of general windows. The folding mode is suitable for
the opening mode of multiple windows, which is generally used when
making partition or floor to ceiling windows.
Installation method of louver 4
Precautions for shutter installation: if the shutter is fixed, it
will bring inconvenience to cleaning the window glass. Generally,
fixed installation is not selected. The flat opening mode has the
characteristics of good sealing, and is suitable for the
installation of small windows or single or two windows. The
push-pull mode takes up less space and is suitable for the
installation of general windows. The folding mode is suitable for
the opening mode of multiple windows. Generally, the inner frame is
used for partition or floor to ceiling windows.
Performance | Parameter | National Standard |
Wind Load Resistance | 4.5<=p3>=5.0 | level 9 |
Air Tightness | 2.5<=q1<=2.0 | level 8 |
Water Tightness | 350<=△p>=700 | level 7 |
Thermal Insulation | 3.0>k>=2.5 | level 5 |
Sound Insulation | 35=<Rw+Ctr<40 | level 3 |
|