Electrophoresis Aluminum Bathroom Doors Casement With Stainless Steel Mesh

KNB65 Series Aluminum Single Interior Casement Bathroom Door(Patterned) With Single Glass

Aluminum Bathroom Door Frame:

1. the door frame is composed of embedded door frame and specific door frame
(1) Embedded door frame: it is clear that embedded door frame is a basic theoretical door frame mark value given by the manufacturer in advance during the whole process of installation of flat door hardware accessories. The mark value is a absolute. For the value, there is no dimension tolerance, and no deviation is caused. Once given, it becomes an indispensable part of the calculation method of door frame. Can we say that there is no array for the value, But generally, it is advisable to take the positive and middle values of the specific door frame, such as: the specific door frame of the door frame and the door frame is 4-7mm (the sum of the upper and lower or left door frames), then the mark value of the embedded door frame shall be clearly 6 (or 5) mm. once this value is clear, do not change, because it is related to the door leaf painting, the measurement of the side plate specification and the * working personnel's habit inertia
(2) Specific door frame: the size of the specific door frame is based on the accuracy of the application machine and equipment. * the master of the staff and the needs of customers, the provisions of the sales market and other elements are clear. If the clear becomes more and more harmful to the quality of the goods, the appearance design is beautiful and generous, even if the locking is locked, the vibrating locking tongue will be shot out, although it is very easy to make it, However, it is not suitable for the sales market and loses the competitive ability. If the clear reduction, the accuracy of the machine and equipment and the standard of * are high, the appearance is good-looking, but * difficult. If the specific door frame is too small, it also harms the opening and closing of the door frame. Therefore, the specific door frame is a very important problem, and should be treated carefully. Because the deviation caused by the door frame and door frame in the whole process of * is very important, Therefore, the criterion of the specific door frame is a category value, not a positive standard value
The specific door frame is a very important parameter, which is related to the size of the outer gap, the process performance of the door leaf, and the formulation of product standards. It is a key index value of the competition in the commodity market of the manufacturing industry.

Glass Types: 

Toughened glass - the safest: if toughened glass is used on both sides of the indoor and outdoor glass, the impact resistance and safety of the glass will be greatly improved indoor and outdoor. Because the impact resistance of tempered glass is 5-10 times that of ordinary glass, and its bending resistance is 3-5 times that of ordinary glass, it can be said to be safe.

Insulating glass - better sound insulation and more energy saving. Because the thermal conductivity of the sealed middle air layer is much lower than that of the glass, compared with the single glass, the insulating performance of the insulating glass can be increased by two times, and the power consumption of the air-conditioned buildings can be greatly reduced. In summer, it can insulate more than 70%, while in winter, it is not easy to keep the indoor heating loss, reducing the heat loss up to 40%, playing the role of heat preservation, so as to turn the cool summer and warm winter into reality.

Laminated glass - high safety, sound insulation, energy saving and UV protection. In general, the middle layer of laminated glass is made of PVB interlayer, and the PVB membrane has the damping function of filtering sound waves (reducing the volume transmission by reducing the vibration amplitude of sound).

Coated glass: coated glass is coated with one or more layers of metal, alloy or metal compound film on the surface of glass to change the optical properties of glass and meet certain requirements. According to the different characteristics of products, coated glass can be divided into the following categories: heat reflective glass, Low-E glass, conductive film glass, etc.

Features:

Single edge integrated frame saves time and cost
Steel structure line transition, perfect match with the inner fan, enhance the three-dimensional sense
Convenient movable corner code splicing, the smooth surface of the inner fan is simple
The inner fan is 38mm thick and firm
Standard 5mm + 9A + 5mm insulating glass, optional art glass