|
[China]
Trade Verify
Address: 4-510, 33 BUILDING, NO.6 HOUTIAN ROAD HIGH-TECH DEVELOPMENT DISTRICT,LUOYANG AREA OF CHINA(HENAN)PILOT FREE TRADE ZONE
Contact name:vivihe
LUOYANG SUPER FOLIAGE IMPORT&EXPORT TRADE CO,LTD |
|
Verified Suppliers
|
|
|
HRC55 - HRC60 Chrome Plated Rod Hydraulic Accessories Use
Introduction of Chrome Plated Rod
Generally, in oil cylinders and hydraulic cylinders, there are many
applications of chrome-plated rods, and what they specifically
include are mainly:
(1) The material is usually made of No. 45 steel, so that it can
withstand greater impact. However, if it is used for heavy load
transmission, it is better to use 40Cr as a material.
(2) Generally speaking, chrome-plated rods are cylindrical. When
the diameter is relatively large, hollow chrome-plated rods can be
considered, which is sometimes good.
(3) If the surface of the chrome-plated rod is finished, the
roughness should not be greater than 0.65um, otherwise it is
unqualified.
The most widely used materials for chrome-plated rods are: 40Cr,
No. 45 steel.
(Product of a certain manufacturer) Material: High-quality 45#
steel Hardness: HRC62+2 Surface hardening thickness: 0.8~2.5mm
Surface roughness: Ra0.2-0.4 Hard chrome thickness: 0.015-0.025mm
Straightness: 80μm/1000mm.
Usage of Chrome Plated Rod
Chrome Plated Rod is widely used in rubber and plastic machinery
such as oil cylinders, cylinders, injection molding machines, blow
molding machines, die-casting machines, air hydraulic machinery,
engineering machinery, medical machinery, light source
machinery, textile machinery and other automation equipment.
Parameters
Model | HRC55 - HRC60 Chrome Plated Rod Hydraulic Accessories Use | ||
Diameter | Metric
Diameter:3mm,4mm,5mm,6mm,8mm,10mm,12mm,16mm,20mm,25mm.....300mm Inch
Diameter:6.35mm.9.525mm.12.7mm,15.875mm,19.05mm,25.4mm,31.75mm,38.1mm | ||
Length | Full Length 6000mm, it can be cut off according to customer
requirement. | ||
Quality | ISO9001:2008 standard | ||
Material | CK45 (SAE1045, S45C), 42CrMo (SAE4140), 20MnV6,St52, Stainless
Steel | ||
Surface finish | Hard Chrome / None Chrome | ||
Plating Thickness | 10um ~ 20um in radius. | ||
Heat treated | Not Hardened / Induction Hardened | ||
Hardness | HRC:58-62 | ||
Hardness Depth | 0.8-3.0mm | ||
Precision | g6, h6, h7 or according to your requirement. | ||
Roughness | Less than 1.5μm | ||
Straightness | Less than 1.5μm of 100mm (Rmax) | ||
Roundness | Less than 3.0μm (Rmax) | ||
Performance | Long life and low noise | ||
Custom-made | End Stepped, End Tapped, End Tread, Wrench Flats, Cross Drilled
Holes, Key Groove, Set Screw Grooved, and so on. | ||
technical standard:
Outer diameter accuracy: f7, f8, h7
Surface finish: ≦Ra0.4S
Roundness: ≦0.01mm
Straightness: ≦0.15/1000mm
Hard chrome plating thickness: 0.015~0.05mm (can be customized
according to customer requirements)
Surface hardness: HB220-260
Standard outer diameter: ￠3~￠120
Standard length: 1000-6000mm
Material: S45C (45#), 40Cr, GCr15, 2Cr13, 42CrMo, SUS304, SUS303,
SUS316, etc.
Picture
