Hangzhou FASEC Buildings Co.,Ltd. |
Verified Suppliers
|
|
The structural glass assembly components are made in a professional
production workshop, and the processing technology is as follows:
Aluminum frame assembly
After cutting the aluminum profile, it should be assembled on a
special workbench. When mass producing aluminum frames, molds
should be set on the workbench and assembled according to fixed
molds to ensure the uniformity of aluminum frame assembly. The
assembled aluminum frame should be checked for the following items:
the difference in the size and length of the opposite sides of the
aluminum frame; the difference in the diagonal length of the
aluminum frame; the assembly gap between the aluminum materials;
the flatness between adjacent aluminum materials.
Glass making
The glass is processed by the manufacturer as required and then
sent to the aluminum frame assembly workshop.
purification
Purification is the most critical process in the production of
structural glass assembly. Only by carefully purifying the surface
of the substrate in accordance with the process requirements, can
structural glass assembly components with specified reliability be
manufactured. For oily stains, use xylene; for non-oily stains, use
a mixed solvent of isopropyl alcohol and water. The purification
method uses two rags: pour the solvent on a rag, wipe the surface
of the substrate in one direction, and wipe the solvent that
dissolves the stain with a clean rag before the solvent that
dissolves the stain is not evaporated Clean (if this rag is dirty,
replace it with a clean rag). Do not wipe after the solvent
evaporates, because after the solvent evaporates, the stains still
remain on the surface of the substrate, and a dry cloth cannot be
wiped off.
Use non-marking and non-linting cotton cloth for the rag. At the
same time, please note that the solvent can only be poured on the
rag, and the rag should not be used to dip the solvent into the
container to prevent the stained rag from contaminating the
solvent. Glue is applied immediately within 30 minutes after
purification, because if the residence time after purification is
too long, the surface of the substrate will be contaminated by
pollutants in the surrounding environment. At this time, the glue
must be re-purified.
position
Positioning is to fix the glass on the specified position of the
aluminum frame. Generally, a positioning fixture is used to ensure
that the reference lines of the two coincide. On the positioning
platform, a baffle with a height of about 100mm is set along a
group of adjacent sides of the platform as a positioning reference
for the glass. An aluminum frame positioning fixture is installed
on the platform surface to fix the aluminum frame on the
predetermined design position of the glass and aluminum frame. On
the platform, stick the double-sided adhesive strip on the aluminum
frame according to the design position, so that the glass will fall
along the blocking plate, and the two baselines coincide.
The glass must be positioned successfully at one time, and the
glass cannot be moved when the positioning is incorrect, because
once the glass contacts the double-sided tape, the self-adhesive
will stick to the glass. Applying structural adhesive on this layer
of self-adhesive will not guarantee its adhesion to the glass.
Connect firmly. After the glass is positioned, an empty web is
formed with the glass and aluminum frame as the side wall and the
cushion strip as the bottom. The size should be the same as the
width and thickness of the glue joint.
Performance Parameter | ||
Performance | EU-STD | GB/T7106 GB/T8484 |
Air Tightness | Class4 | Class8 |
Water Tightness | E1500 | Class6 |
Wind Resistance | C5 | Class9 |
Insulating Properties | K 1.45W/㎡·K | Class8 |
Sound Insulation | Rw=dB39 Glazing 5+12A+5+12A+5 |
Our Certification:
Performance Parameter | ||
Performance | EU-STD | GB/T7106 GB/T8484 |
Air Tightness | Class4 | Class8 |
Water Tightness | E1500 | Class6 |
Wind Resistance | C5 | Class9 |
Insulating Properties | K 1.45W/㎡·K | Class8 |
Sound Insulation | Rw=dB39 Glazing 5+12A+5+12A+5 |