JIMA Aluminum |
Verified Suppliers
|
|
We are specialized in automotive aluminum products. We have some old customer in for automobile application , so we always hold available materials in stock for 0.8mm, 1mm,1.2mm,1.5mm and 2mm ,Such as 6016,6111,6061,6010,6011,6009,5754 5182 ,6181A and 6005A alloy etc ,Size can be cut into as per request.
JIMA focuses on the development and production of high-end aluminium alloy materials,and provides customers with various product solutions.JIMA has ability to produce wide aluminium alloy sheets such as 3003 alloy,4017 alloy,5052 alloy which are applied to van trailer's roof and side plate, and such as 6061 alloy applied to van trailer's floor.
Applied to the dump truck floor
Applied to the fire engine side panel
Applied to the mail truck
Large size:Max.width reaches 2650mm,length≥10000mm.
High uniformity:Annealed by continuous heat treatment line,and the properties differences of the same coil and between coils are slight.
Precise dimension and excellent flatness:Dimension and flatness meet EN/ASTM standard.
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Standard |
3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | - | - | 0.10 | - | GB/EN/ASTM |
5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2~2.8 | 0.15~0.35 | 0.10 | - | GB/EN/ASTM |
Typical Alloy | Typcial Temper | Thickness (MM) | Width (MM) | Length(MM) |
5052 | H32/H34 | 0.2~3.5 | 2000~2650 | ≥10000 |
3003 | H14/H16/H24/H26 | 0.2~3.5 | 2000~2650 | ≥10000 |
Typical Alloy | Typcial Temper | Rp0.2(Mpa) Yield Strength | Rm(Mpa) Tensile Strength | A50(%) Elongation | Thickness(mm) |
5052 | H32 | ≥160 | 215~265 | ≥4 | 0.2~3.5 |
H34 | ≥200 | 255~305 | ≥2 | ||
3003 | H14 | ≥115 | 140~180 | ≥3 | 0.2~3.5 |
H24 | |||||
H16 | ≥145 | 165~250 | ≥3 | 0.2~3.5 | |
H26 |