Acoustic Insulation Perforated Aluminum Honeycomb Ceiling Panel
This composite panel is made from two aluminium alloy sheets
as skins and aluminum honeycomb as the core. The honeycomb
structure gives the panel better flatness and strength than
traditional aluminium ceiling tiles, meanwhile, the honeycomb
ceiling panel can be made in larger size and manufactured into
curved or angled shapes.
The perforation on top aluminum skin of the panels to give good
sound insulation performance. And the non-woven fabric bewteen the
perforated aluminum skin and the honeycomb core will prevent the
glues come out from inside, so the perforated aluminum surface is
clean with decorative beauty.
The top aluminum skin is first coated with different colors, then
be perforated before composition.
Production Specification:
Product | Material | Size | Thickness (mm) | Colour | Surface Treatment |
Aluminum honeycomb panel | Aluminum alloy | According to your request. | 8mm,10mm,12mm,15mm,20mm,etc. | Refer to RAL or Pantone color chart | Powder coating PVDF Heat transfer |
Perforation:Diameter 2.5mm,3.0mm etc
Features:
• Low weight and competitive cost
• High stiffness and strength
• Easy to fabricate and install
• Recyclable
• PVDF coating or anodized finish aluminum facing skins for good
anti-corrosion performance and high resistance.
• Aluminium facing skins are available in a range of thicknesses
from 0.5mm to 3.0mm as per design requirements
• Panels can be produced with different aluminum sheet thicknesses
on front and back faces and panel thicknesses as per custom design
requirements for weight, strength and installation.
• Aluminum faced panels are chemically cleaned: suitable for
painting or the application of decorative laminates
• Brushed and anodised aluminum finishes are also available
• Aluminum honeycomb cell size is 4mm to 8mm as request.
• Wide selection of Joiners &Assembly Accessories are
available.
Manufacturing Procedure
Roller coating or anodized surface, unrolling and cutting aluminium
sheets, punching corners, bending aluminum sheets, supplying
adhesive (glue) to front and back panels, unfolding aluminum
honeycomb core, cutting out and putting honeycomb core into back
panel, putting front panel, fixing front and back panels, putting
sandwich panels into laminating machine, laminating, checking and
finishing. To make panels ready for installation (for architecture
cladding and decoration), asembling accessories to the panels and
then packing for shipping.
Packing and Container Loading
There will be protective film on each panel.