|
[China]
Trade Verify
Address: No. 388 Pangu Road, Baoshan district, Shanghai, 201999, China
Contact name:Martin Lee
Shanghai Tankii Alloy Material Co.,Ltd |
|
Verified Suppliers
|
|
|
SS316 stainless steel Thermal spray wire 3.17mm 3.2mm coating wire for surface coating
Product Introduction:
316 stainless steel wire specifically designed for arc spraying. It produces a dense, well-bonded coating with excellent machinability and wear and corrosion resistance. 316 SS is widely used for machine element repair, dimensional restoration and wear resistance applications. It has high shrink characteristics and should not be used for coatings over 0.075 inched thick.
Surface Preparation:
Surface should be clean, white metal, with no oxides(rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended methodof preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
Chemical Compositin:
| Cr | Ni | Mn | Si | Fe | Mo |
| 17.0 | 12.0 | 2.0 | 1.0 | Bal | 2.5 |
Typical Characteristics:
| Typical Hardness | HRB 90-95 |
| Bond Strength | 6750 psi |
| Deposit Rate | 10 lbs/hr/100A |
| Deposit Efficiency | 75% |
