Home Companies Dome Metals Co., Ltd.

Extruded Magnesium Alloy Plate Sheet 50mm AZ31 WE43

Active Member

Contact Us

[China]

Address: No. 1394, hanghai East Road, Zhengzhou area (Jingkai), Henan pilot Free Trade Zone,China

Contact name:Linda

Dome Metals Co., Ltd.

Extruded Magnesium Alloy Plate Sheet 50mm AZ31 WE43

Country/Region	china
City & Province	zhengzhou henan
Categories	Other Metals & Metal Products

Product Details

Extruded Magnesium Alloy Plate Price AZ61 Magnesium Alloy Price

Introduction:

Practically, all the commercial magnesium alloys manufactured in the United States contain aluminium (3 to 13 percent) and manganese (0.1 to 0.4 percent). Many also contain zinc (0.5 to 3 percent) and some are hardenable by heat treatment. All the alloys may be used for more than one product form, but alloys AZ63 and AZ92 are most used for sand castings, AZ91 for die castings, and AZ92 generally employed for permanent mold castings (while AZ63 and A10 are sometimes also used in the latter application as well). For forgings, AZ61 is most used, and here alloy M1 is employed where low strength is required and AZ80 for highest strength. For extrusions, a wide range of shapes, bars, and tubes are made from M1 alloy where low strength suffices or where welding to M1 castings is planned. Alloys AZ31, AZ61 and AZ80 are employed for extrusions in the order named, where increase in strength justifies their increased relative costs.

Parameter:

Product Name	AZ61 Magnesium alloy plate magnesium sheet for smaller weight class robots
size	as customer's required
Regular type	thickness 0.3-200mm,length x width:500x1000mm,610x914mm
application	hot stamping,engraving embossing printing stamping

Item	Thickness (mm)	Size (mm)	Weight (kg)
Magnesium Photoengraving Plate	1,00	610 x 914	1,00
Magnesium Photoengraving Plate	1,50	610 x 914	1,50
Magnesium Photoengraving Plate	1,63	610 x 914	1,63
Magnesium Photoengraving Plate	1,75	610 x 914	1,75
Magnesium Photoengraving Plate	2,00	610 x 914	2,00
Magnesium Photoengraving Plate	2,50	610 x 914	2,50
Magnesium Photoengraving Plate	3,00	610 x 914	3,00
Magnesium Photoengraving Plate	4,00	610 x 914	4,00
Magnesium Photoengraving Plate	5,00	610 x 914	5,00
Magnesium Photoengraving Plate	6,35	610 x 914	6,35
Magnesium Photoengraving Plate	6,50	610 x 914	6,50
Magnesium Photoengraving Plate	7,00	610 x 914	7,00

Application:

1. Automobile field

Magnesium alloys are used as automotive parts as the following advantages:

1) Improve the comprehensive standards of fuel economy, reduce exhaust emissions and fuel costs. According to estimates, 60%of the fuel used for cars consumes the weight of the car, and the car consumption will be reduced by 8%-10%; the fuel consumption will be reduced by 8%;

2) Decreased weight can increase the loading capacity and effective load of the vehicle, while also improving the brakes and acceleration performance;

3) It can greatly improve the noise and vibration of the vehicle.

Fabrication:

Hot and cold working

Magnesium alloys harden rapidly with any type of cold work, and therefore cannot be extensively cold formed without repeated annealing. Sharp bending, spinning, or drawing must be done at about 500 to 600 °F (260 to 316 °C), although gentle bending around large radii can be done cold. Slow forming gives better results than rapid shaping. Press forging is preferred to hammer forging, because the press allows greater time for metal flow. The plastic forging range is 500 to 800 °F (260 to 427 °C). Metal worked outside this range is easily broken due to lack of available deformation mechanisms.