Sunport C6 III MWT Mono Half-Cut Solar Cell Module Panel Array Eff.
20.9% 370w 375w 380w 385w 390w Solar Module Panel
The Sunport C6 III MWT Mono Half-Cut solar panels are advanced
photovoltaic modules that utilize Metal Wrap Through (MWT)
technology and a half-cut cell design to maximize energy
production. Available in power outputs ranging from 370W to 390W,
these panels offer efficient and reliable performance for various
residential, commercial, and industrial applications.
The panels feature advanced anti-reflective glass and cell surface
texturing, enhancing light absorption and increasing energy
production, even in low-light conditions. This makes them highly
efficient and productive, allowing for maximum energy generation
throughout the day.
Specification
Product Paramenters
Max-Power(Pm) | 365w | 370w | 375w | 380w | 385w | Power Tolerance | 0~+5 | Max-Power Voltage(Vm) | 34.9 | 35.1 | 35.3 | 35.5 | 35.7 | Max-Power Current(lm) | 10.46 | 10.54 | 10.62 | 10.70 | 10.78 | Open-Circuit Voltage(Voc) | 42.4 | 42.6 | 42.8 | 43.0 | 43.2 | Short-Circuit Current(lsc) | 11.09 | 11.16 | 11.23 | 11.30 | 11.35 | Module Efficiency(qm) | 20.7 | 21.0 | 21.2 | 21.5 | 21.8 | Operating Temperature(°C) | -40℃~+85℃ | Maximum system voltage | DC1500V(IEC) | Maximum series fuse rating | 15A | Temperature coefficients of Pmax | -0.36%/°C | Temperature coefficients of Voc | -0.28%/°C | Temperature coefficients of Isc | 0.06%/°C | Nominal operating cell temperature(NOCT) | 43±2°C |
|
TECHNOLOGY COMPARISON
Compared with conventional module, MWT modules reduce 3% shaded
area with no busbars. MWT module technology replaces string ribbon
by conductive back sheet, abandoning strain, micro-crack and
results power degradation, greatly improving stability and
reliability.
MWT
Positive and negative electrodes are both on the rear side of solar
cell
Conventional
Positive and negative electrodes are located on opposite sides of
the cell
MWT
Busbar-free design exhibits higher power output by decreasing
shading area up to 3 %
Conventional
Conventional design covers more cell surface from the main busbars,
therefore the power output is limited
Replace conventional soldering with conductive foil and 2D
encapsulation structure
Conventional Cells connected by string ribbons
Q:Are you a factory or a trading company? |
A:We are a professional Solar Panels Manufacturer in China |
Q:How can we guarantee the products quality? |
A:Always provide the esteemed buyer a pre-production sample before
mass production; Always testing every product before despatching
the shipments; |
Q:What products we can supply you? |
A:Solar Panel,Inverter,Mounting System,Battery,Pv Cable,Distributor
Box,Pv Connector,Etc |
|
Q:Can the products pricing be cheaper? |
A:Of course, you will be offered a a very good discount with large
quantities. |
Q: Can print our company‘s logo on the pv panels? |
A:Yes! And we accept the OEM&ODM orders. |