100V battery PACK tester charge and discharge aging cabinet with
The charge discharge aging system mainly includes PC software, USB
hub, router, aging instrument. The core is aging instrument, aging
32 bit ARM
chip was chosen as main control chip, compared to the traditional
microcontroller in the execution speed greatly improved, measuring
voltage and current accuracy is higher, through the RS232, network
1. With constant current and constant voltage charging function
2. With constant current discharge function
3. Fully meet the battery charge and discharge with mouth and
separation requirements, that is, 2 lines (P+ P-) and 3 lines (P+
P- C-). At the same time,
the CH+ P+ P- can be used to protect the negative plate discharge
by aging the positive plate charging protection.
4. By charging and discharging the battery, the charge protection
and discharge protection of the battery can be detected.
5. Charge and discharge the battery, record the charge capacity and
discharge capacity of the battery.
6. Anti reverse protection function, upper and lower voltage set
protection, safety discharge current protection (maximum current
7. Within 10 machines, through the serial port to connect the PC
computer;; more than 10 sets of equipment, you can use the network
In this way, PC computer only need to provide a network port, you
can control less than 254 instruments.
8. Aging instrument software system using the classic mature C/S
9. Based on the Windows interface, the use of MYSQ database storage
test data, and can export curves.
Current: charge range:0-10000mA
Discharge power :below 1400W
Time : Patrol time :under 5s
Timer range :0-999hours /step
you can reach me by email
Shenzhen AITOP Intelligent Equipment Co., Ltd.