VW Bentley Continental Front Right Phaeton Air Spring 3D0616040D

Application:

Front Left  for Volkswagen Phaeton 2002-2007 / Bentley Continental 2003-2012

OE#:  3D0616040D, 3D0616040S, 3D0616040AA, 3D0616040AC

The air supply
The air supply system consists of the engine air compressor, the air tanks, air valves and air lines. The engine air compressor supplies air for all the air equipment on the vehicle. The pressure delivered by the compressor varies. For several years, the air supply was maintained around 120 to 125 psi but on some new vehicles this has been improved to 135 psi. Dash gauges are present that will supply system pressure information but all vehicles have what we say to as a “pop off valve”. You can get the valve “pop off” when the system reaches the maximum air pressure.

About Air suspension and its uses
Pneumatic air struts, an air compressor, a solenoid valve block, an accumulator tank, and air lines that connect these components together.The air suspension strut is made up of an air spring that acts as the coil spring and a solenoid which provides the dampening effect by magnetically resisting the linear motion of the piston. The air spring is comprised of a pressurized rubber bag or “U-bellow” surrounding a cylinder-piston setup. In order to enhance durability, the bellow is made up of polyamide cord woven inserts surrounding an elastomer (i.e. rubber) that ensures the bellow remains air-tight. In order to improve the response behavior to external forces such as those encountered during cornering or while driving over bumpy roads, the bellows are often encased in an aluminum cylinder. Some air suspension struts have an air reservoir attached to the air spring in order to have a sufficient volume of air necessary to satisfy comfort requirements without increasing the diameter of the strut. This is often done in the rear struts of Audi vehicles in order to maintain a large boot space.

A series of body level and acceleration sensors feed information into a control module that in turn instructs the accumulator, compressor, and valve block to move air around accordingly.

About Air Springs & Air suspension compressor
HongGu Air Suspension Compressors burnout is one of the more frequent air suspension problems encountered by drivers. Burnout occurs when the air suspension compressor becomes inoperative from overuse caused by a leaking air spring or other component. By establishing partnerships with the leading Suppliers. These high-quality compressors are tested qualitative facilities and then most are fitted with application-specific components such as brackets, wiring harnesses, relays and integrated dryers to provide a fast, flawless, Plug-n-Play installation.

HongGu Air Springs, air suspension strut/ air shock absorber, air suspension compressor pump undergo extensive testing on HongGu-owned vehicles. Air springs feature state-of-the art, multi-ply air bladders manufactured by industry-leading rubber companies . The air springs are assembled, tested, and packaged using ISO-certified quality management principles. These Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

What is an air suspension shock absorber
The air spring shock absorber is mainly used to suppress the shock when the spring is shocking and the impact from the road surface. While it is inlet, although the shock absorbing spring can filter the vibration of the road, the spring itself will reciprocate, while the shock absorber is used to suppress such a spring jump. The shock absorber is too soft, the body will jump up and down, and the shock absorber will bring too much resistance to hinder the normal work of the spring. During the modification of the suspension system, the hard shock absorber is to match the hard spring, and the hardness of the spring is closely related to the vehicle weight, so the heavier cars generally use a harder shock absorber. Apparatus in contact with the shocking crankshaft, is used to counter the twist vibration of the crankshaft (i.e., the phenomenon that the crankshaft is turned by the impact force of the cylinder is flicked).

Note:
1. 12 month warranty
2. 100% quality testing before shipping.We will provide you excellent customer service and 100% satisfaction warranty.
3. Please note that we do not be responsible for any customers fee which is charged by your country.
When you take the order ,it means the buyer has agreed clearly all of our terms.If not ,please contact us before order.
Instruction is not included. Professional installation is recommended. We are not responsible for the warranty because of Artificial damage and Improper installation. Please provide photos or videos to apply for warranty. If you are not sure whether our parts fit your car please provide the VIN number of your car,we will confirm for you.

Our Company

HongGu Auto Parts Co., Ltd. Founded in 2010, factory set up in Shunde District Foshan City, covering an area of about 20, 000 square meters. The company introduces the advanced European and American technology, focuses on developing premium and durable products, adheres to the concept of technology and quality first, adopts high grade materials, structural designs, well-equipped facilities and excellent quality control system throughout all stages of production, enable us to provide our customers a cost-effective and premium auto parts with excellent output. All of our products have been tested before the shipment: leaking tested, fatigue tested etc., and passed IATF16949. Our Company mainly develops Air spring, Air suspension, air compressor and suspension parts for luxurious cars of after-sales markets, including Mercedes Benz, BMW, Audi, Land Rover, Porsche, Volkswagen, Jaguar, Bentley and GMC. Premium products and competitive price help us to win good reputation from our clients. Our products are exported worldwide: Europe, Middle East, North America, South Africa and Asia. Specially USA, Russia, Canada, Germany, United Arab Emirates.

FQA

Q1: What's your advantage?
1. Our factory manufactures high-end products with good quality, and excellentin workmanship
2. Our 1 years product warranty is much longer than other China suppliers,which can guarantee longer service life and lower maintenance rate
3. Reasonable price and professional service
4. We can also source other auto parts for you according to your detailedrequirements
5. In time delivery

Q2: How about your delivery time?
For small order (less than 20pcs), normally 3-5 working days after receivingpayment. For bigger order, normally 15-20 working days after receiving payment, or basing on the order quantity.

Q3: What's your product categories?
1.Air Suspension Shock
2.Air Suspension Spring
3. Air Suspension Compressor
4. Valve Block

Q4: How to guarantee your after-sales service?
1. Strict inspection during production
2. Recheck the products before shipment to ensure our packaging in goodcondition
3.Track and receive feedback from our customers

Q5: What will you do for customer's complaint?
We will respond quickly to our customers within 24 hours after receivingcomplaint.

Q6: What's your payment?
Various payment ways for your choice: T/T, PayPal & Western Union

Q7: What's your MOQ?
1 unit per model

Q8: Lead Time?
< 3pcs 3days
< 10pcs 7days
<50pcs about 15days
>100pcs To be Negotiated.

Shipping:
- International express such as UPS, TNT, DHL, etc
- International air: CA, AA, EA, etc
- By sea
- Standard export sea port: Huangpu, Hongkong, Shunde
- Standard export airport: Shenzhen, Hongkong, Guangzhou