Auto Parts Rear Air Bag Spring Suspension 68029912AE For Grand Cherokee 2011-2016 Air Suspension Repair kits

Auto Parts Rear Air Bag Spring Suspension 68029912AE For Grand Cherokee 2011-2016 Air Suspension Repair kits

Product Quality Assurance:

1.Quality Warranty: 12 months

2.How to guarantee your after sales service?

• Specification:

Air Spring Bag ensures that the weight on your vehicle is property distributed to all four tires - this helps stabilize your vehicle, and provides a smoother, safer ride.This air spring we offer is 100% compatible with the original parts.

• Fit for Car Models:

Quick Details:

Description:68029912AE 68029911AB 68029912AC 68029912AD rear shock absorber suspension systems repair kits air bags for 680

Model:680

OEM:68029912AE 68029911AB 68029912AC 68029912AD

Condition:Brand New

Fitting Position:Rear

Material: Rubber Steel Aluminum

Application:680 2011-2015

Warranty:12 months

Delivery: 3-7 days after receiving payment

Air Spring

An air spring is a rubber and fabric bladder that holds air pressure to support a load and isolate passengers and cargo from the shock of motion caused by road irregularities. As the air pressure increases, the air spring can support more load while the spring rate increases. The larger the air spring, the greater the maximum load it can support.

• Packing & Shipping Method

Box Size: 39*20*20 cm

Weight: 4.5 kgs/pcs

Shipping Methods: By Sea,By Air,By Express

• Things to know about air spring:

 

1.Air Spring Installation

1).Before you start installing air springs, make sure you have all the necessary tools and equipment

to perform the repair safely.
2). Familiarize yourself with the suspension on which you are performing the repair by reviewing the

manufacturers service guide.
3). If you are in doubt about something, ask for assistance from a qualified suspension specialist, the

suspension manufacturer or the air spring manufacturer; This can save you a lot of time and

aggravation later in the job

 

2.Important tips to remember when installing a new unit

1).Check levelling valve, linkage and transmission parts for wear and damage and if necessary replace

the damaged parts.
2).Check that the shock absorber for leakages and take a shock absorber test. A defective shock

absorber must be replaced.
Once the air lines are disconnected, check their entire length for cracks or other damage. Replace

worn parts.
With the air spring removed, other parts of the air suspension become more accessible. Check for

wear or damage of the frame hangers, trailing arm bushings, torque rods, the trailing arms and the

air spring mounts. When it is necessary, also replace parts.
3).Check bearing for air spring bellow for external damage, deformation, sharp edges and correct

fastening.
4).Before installing the new unit, clean the air spring mounting plates to ensure proper attachment to

the suspension.
5).Always use new attaching bolts for the installation and observe the tightening torques. Never use

old bolts, because these can fall out.
6).Check the linkage of the levelling valve to see that it is functioning properly. Under load, the linkage

should move from the neutral position up to the intake position. This lets air into the springs,

which brings the arm back to the neutral position.That opens the exhaust valve, allowing air to

escape until the arm returns to the neutral position. Then check the driving level.

 

• About Us:

 

We offer replacement parts for auto air suspension system such as air suspension shocks,air springs,

air suspension compressors,air suspension repair kits,control arms and so on for Mercedes-Benz,

BMW,Audi,Landrover.All parts are 100% compatible with the original OEM components,and they

are offered with a-12-month warranty.