|
[China]
Trade Verify
Address: No.2 Weixin Road,Suzhou Industrial Park,Jiangsu,China
Contact name:Sofia
Suzhou Sujing Automation Equipment corporation limited |
|
Verified Suppliers
|
|
|
SJFC-200 PM2.5 PM1 PM10 Dust Particle Measurement Dust Detector
SJFC-200 PM2.5 PM1 PM10 Dust Particle Measurement Dust Detector is used to test dust concentration. the test dust by light attenuation curve, Intuitive shows the measured dust concentration via the control program, Using the principle of scattering dust analyzer calibration.
The specification of dust particle measurement
| Outside Dim | 200×160×90(Wide×High×Deep) |
| Display | 3.5 inch color screen(optional) |
| Battery | built-in 5200mah li-ion Battery(optional) |
| Weight | 2.5kg |
| Max.Consumption | 10W |
| Power Source | DC12-24V |
| Size channels | PM1.0 PM2.5 PM10 (or PM2.5 PM10 TSP) |
| Flow Rate | 1L/min ±5% flow (long life pump) |
| Sample Time | 1-999s Selectable, ≥6s recommended |
| Sensibility | 0.1µg/m3 |
| Repeatability | ≤±2% |
| Accuracy | ≤±10% |
| Detection Range | 0-40mg/m3 |
| Data Output | RS485 / RS232 |
| Comm. protocol | Modbus RTU |
| Operating Time | 5 hours |
| Optional parameters | Temperature, RH, combustible gas, oxygen, carbon dioxide, etc. |
| Data records | 2000 |
| Environmental | Temperature: -10-50℃; Humidity:<85%RH; Atmosphere Pressure:86-106Kpa |
| Accessories | Carrying case, power adapter, zero count filter , Optional: explosion protective and outdoor protective case |
The picture of dust particle measurement
Company
