Active Member
|
[China]
Address: PO1669, Maanshan, Anhui Province, China
Contact name:Kelly
Maanshan Ruika Metal Products Technology Co., Ltd. |
|
|
Product Introduction of High Efficiency Air Source Heat Pump
Water Heater
A heating device that absorbs the heat energy of the air in the
environment to heat water, because the power consumption is only
1/4 to 1/3 of the direct electric heating method, and it is less
affected by the regional environment, and it can operate stably
throughout the year Therefore, the air-energy hot water machine has
become a new energy-saving hot water heating device. According to
whether the compressor is equipped with a jet enthalpy increase
device, the air-energy cold and hot water machines are divided into
two categories: conventional type and ultra-low temperature type.
Among them, the conventional air-energy hot water machine can
operate stably for a long time in the environment of -7℃~43℃ , The
ultra-low temperature air-energy water heater runs stably for a
long time in the environment of -26℃~43℃.
Product Usage of High Efficiency Air Source Heat Pump Water
Heater
It is suitable for hot water supply in homes, schools, hospitals,
hotels, SPA clubs and other occasions.
Performance characteristics
1. Adopt special compressor for heat pump, with high thermal
efficiency and long life. The ultra-low temperature model is
equipped with the quasi-two Yasuo jet enthalpy system to realize
stable operation at -26℃.
2. The unique enhanced evaporator structure and high-efficiency
piping system can effectively improve the winter energy efficiency
ratio and reduce the frosting rate. With the intelligent heat pump
defrosting system, it can ensure the energy efficiency of the heat
pump in humid and low temperature.
3. Modular design, which can realize the joint control and remote
monitoring of 16 units. Each unit has an independent frame
structure, heating system, power distribution system, control
system and protection function. When one of the units fails, it
will not affect The normal operation of other units.
4. The advanced intelligent control system has comprehensive
protection functions such as high pressure protection, low pressure
protection, water shortage protection, leakage protection, phase
loss protection, overload protection, antifreeze protection, and
exhaust temperature overheat protection. It is convenient and
simple to manage.
Specification of High Efficiency Air Source Heat Pump Water Heater
| Triple supply parameters Cooling, heating and hot water functions | |||||
| Item | KCHR-8I/BP Side wind | KCHR-13I/BP Side wind) | KCHR-15I/BP Side wind | KCHR-15II/BP (Out of the wind) | |
| Rated voltage | 220V~50Hz | 220V~50Hz | 220V~50Hz | 380V 3N~50Hz | |
| Cooling and heating | Nominal cooling capacity | 7.8kW(2kW-9kW) | 13kW(3kW-15kW) | 14.5kW(4kW-16.5kW) | 14.5kW(4kW-16.5kW) |
| Nominal cooling power consumption | 2.77KW | 4.6KW | 5.27KW | 5.27KW | |
| Nominal cooling(COP) | 2.81 | 2.82 | 2.75 | 2.75 | |
| IPLV | 4.11 | 4.13 | 4.02 | 4.02 | |
| Nominal heating capacity | 8.4kW(2.5kW-9.6kW) | 14kW(3.5kW-16kW) | 17kW(4.3kW-18.5kW) | 17kW(2.5kW-18.5kW) | |
| Nominal heating power consumption | 2.78KW | 4.5KW | 5.6KW | 5.6KW | |
| Heating | Nominal heating capacity | 6.8KW | 10.5KW | 13KW | 13KW |
| Nominal heating power consumption | 1.75KW | 2.65KW | 3.3KW | 3.3KW | |
| Nominal heating(COP) | 3.88 | 3.96 | 3.93 | 3.93 | |
| Maximum operating current | 20A | 33A | 41A | 21A | |
| Maximum power consumption | 4KW | 6.6KW | 7.9KW | 7.9KW | |
| Rated water flow | 1.34m²/h | 2.24m²/h | 2.5m²/h | 2.5m²/h | |
| Refrigerant/charge volume | R410A/1750g | R410A/4000g | R410A/4000g | R410A/4800g | |
| noise | ≤54dB(A) | ≤56dB(A) | ≤57dB(A) | ≤58dB(A) | |
| Water resistance | ≤14kPa | ≤15kPa | ≤21kPa | ≤21kPa | |
| Maximum working pressure on low pressure/high pressure side | 4.5Mpa/0.15Mpa | 4.5Mpa/0.15Mpa | 4.5Mpa/0.15Mpa | 4.5Mpa/0.15Mpa | |
| Allowable working pressure on suction/exhaust side | 4.5Mpa/0.15Mpa | 4.5Mpa/0.15Mpa | 4.5Mpa/0.15Mpa | 4.5Mpa/0.15Mpa | |
| Anti-shock level | I | I | I | I | |
| waterproof level | IPX4 | IPX4 | IPX4 | IPX4 | |
| Unit size (l× w × h) | 1030×410×865(mm) | 1030×410×1390(mm) | 1030×410×1390(mm) | 820×780×1700(mm) | |
| (Cold and warm) Caliber of inlet and outlet | DN25 | DN32 | DN32 | DN32 | |
| (Hot water) Caliber | DN20 | DN25 | DN25 | DN25 | |
