Active Member
|
[China]
Address: PO1669, Maanshan, Anhui Province, China
Contact name:Kelly
Maanshan Ruika Metal Products Technology Co., Ltd. |
|
|
Description of Energy-Saving Air To Water Heat Pump Water Heater For Residential
Heating
Function
1.UnderFloor Radient Heating, air conditioner
2. Cooling
3. Hot water
The strength of Energy-Saving Air To Water Heat Pump Water Heater For Residential Heating
Adopt a multi-energy pressure-bearing module hot water control system, including air source heat pump water heaters, solar collectors, electric heating pipes, pressure-bearing module heating water tanks, first pressure-bearing module hot water storage tanks and second A pressure-bearing module hot water storage tank, a circulation pipe and a return pipe are connected through the air source heat pump water heater and the pressure-bearing module heating water tank, and an air source circulating water pump is installed in the middle of the circulation pipe. By installing air source heat pump water heaters, electric heating pipes and solar heat collection pipes in the system, the three types of composite energy sources of air energy, solar energy and electric energy can be combined into a heating system. If there is a lot of hot water demand, the control system can also use air energy, solar energy, and electricity to produce a large amount of hot water. This system can not only produce a large amount of hot water but also has a good energy-saving effect. It has a high degree of intelligence and can adapt to different use needs and changes in various environments.
A fan controller used includes a transformer and a fan capacitor,
the fan capacitor is located on the right of the transformer, the
fan capacitor and the lower part of the transformer are provided
with a main controller, and the lower part of the main controller
is provided with a main controller. There are voltage-level
capacitors, the right part of the main controller is provided with
a contactor, the right part of the contactor is provided with a
circuit breaker, the lower part of the contactor and the circuit
breaker is provided with a power cord clamp, the power cord clamp
Located on the right side of the voltage-grade capacitor. The
transformer, fan capacitor, main controller, voltage-level
capacitor, contactor, circuit breaker and power cord clamp are all
installed on the mounting plate. The utility model has the
advantages of using less capacitance, simple and clear layout, not
easy to damage, low cost, simple structure, etc
Quality control:
100% inspection for each product, 3 phrases test before delivery,
free spares supply, good prize if found any unqualified items
Production line:
3 production lines to guarantee production capacity and quick
delivery, 2 shifts working
Technical paremeters of Energy-Saving Air To Water Heat Pump Water Heater For Residential
Heating
| Item | KCHR-15II/BP (Out of the wind) | |
| Rated voltage | 380V 3N~50Hz | |
| Cooling and heating | Nominal cooling capacity | 14.5kW(4kW-16.5kW) |
| Nominal cooling power consumption | 5.27KW | |
| Nominal cooling(COP) | 2.75 | |
| IPLV | 4.02 | |
| Nominal heating capacity | 17kW(2.5kW-18.5kW) | |
| Nominal heating power consumption | 5.6KW | |
| Heating | Nominal heating capacity | 13KW |
| Nominal heating power consumption | 3.3KW | |
| Nominal heating(COP) | 3.93 | |
| Maximum operating current | 21A | |
| Maximum power consumption | 7.9KW | |
| Rated water flow | 2.5m²/h | |
| Refrigerant/charge volume | R410A/4800g | |
| noise | ≤58dB(A) | |
| Water resistance | ≤21kPa | |
| Maximum working pressure on low pressure/high pressure side | 4.5Mpa/0.15Mpa | |
| Allowable working pressure on suction/exhaust side | 4.5Mpa/0.15Mpa | |
| Anti-shock level | I | |
| waterproof level | IPX4 | |
| Unit size (l× w × h) | 820×780×1700(mm) | |
| (Cold and warm) Caliber of inlet and outlet | DN32 | |
| (Hot water) Caliber | DN25 | |
| Application area | 110㎡ | |
