Active Member
|
[China]
Address: No.109,Huanhua Road,Liwan District,Guangzhou City,Guangdong China
Contact name:HO
Guangzhou DongAo Electrical Co., Ltd. |
|
|
| Article No. | CFT4.0D |
Article Name | Hand push Dehumidifier |
Dehumidify Capacity | 4L/h |
Applying Area(with three meters height) | 90~110M² |
Voltage | 220V/50HZ |
Power | 1150W |
Air Circulation | 550M³/H |
Refrigerant | R22 |
N.W.(KG) | 50KGS |
G.W.(KG) | 62KGS |
Functions
1)Microcomputer automatically control,LED digital display
2)Efficient automatic defrosting system,low temperature appliance
3)Have fault automatically judgment fuction
4)1-24 hours timing function
5)Special humidity 1%RH can be adjusted, humidity setting range
10~98%RH
6)Pipe continue drainage function
7)The bottom have universal wheel, in all direction, no dead angle,
free movement
1. Can you customize the product?
Yes, we can customize any products according to customer's
requirements.
2. Which payment terms are you doing?
L/C, T/T, (100% payment in advance.)
3. Which shipment is available?
By sea, by air, by express or as your requirement.
In the process of transportation and placement of industrial dehumidifier, there will inevitably be vibration, roll and other actions, resulting in the displacement of refrigerant in the compressor.If the machine is turned on at this time, the compressor will not work normally, the noise will be large, and the dehumidification efficiency will be relatively low.Therefore, it is necessary to stand the dehumidifier for a period of time, so that the refrigerant in the compressor can be reflux in place before it is used.
After opening the dehumidifier, it should be kept in standby state as far as possible, and do not open and close frequently, so as to greatly reduce the damage to the machine performance and not waste a lot of electricity.After power failure, it is necessary to turn off the power immediately to prevent the sudden power call and the sudden impact of large current on the dehumidifier and damage the dehumidifier.
In terms of placement, it is recommended to place the dehumidifier in a place with air circulation and flat ground, and put it next to the wall.In this way, the moist air is pumped into the dehumidifier as soon as possible, and the dry air can be quickly circulated to all corners of the workshop to achieve better dehumidification effect.
