Home Companies Shenzhen Firecore Technology Co., Ltd.

DMS USB Dash Camera 1080P Side View High Definition Monitoring

Shenzhen Firecore Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Factory address 3rd Floor Building A Jingjiang Industrial Zone No 101 Shangwei Road Zhangkeng Path Guanlan Street Longhua District Shenzhen Guangdong, China

Contact name:YUKI

Inquir Now

Shenzhen Firecore Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

DMS USB Dash Camera 1080P Side View High Definition Monitoring

Country/Region china
City & Province shenzhen guangdong
Categories Fire Truck
InquireNow

Product Details

USB Dash Camera USB interface monitoring Starlight night vision high - definition wide - angle 1080P

 

1 .  DMS camera installation
DSM cameras can detect and alert unsafe driving behaviors .  By detecting changes in the eyes and face    identify all unsafe driving behaviors of the driver while driving    and provide corresponding voice prompts accordingly
Unsafe driving behaviors include :
a .  Fatigue :  yawning    closing eyes
b .  Make a phone call
c .  Distracted driving :  looking left and right   looking down
d .  Smoking
e .  Driver anomaly :  The driver has left the driver's line of sight
The selection of installation location for DMS cameras should be based on the following principles 
Installation location :  It is recommended to install it on the center console or instrument panel  as shown in Figure 1
Installation angle :  It is recommended to ensure that the angle is within 30 ° to the right in front of the driver   and the smaller the angle   the better    as shown in Figure 2 
Installation distance :  The distance between the camera and the face ranges from 60cm to 120cm, and it is recommended to install it at a position of about 80cm
Ensure that the face is in the center of the DMS camera (can be confirmed through the mobile app)
Ensure that the DMS camera does not obstruct the driver's line of sight or interfere with the driver's vision

 

Ensure that the distance between the DMS camera and the driver's face is not obstructed by other debris such as the steering wheel
The DMS camera needs to be kept horizontal on both sides and cannot be tilted
Under the above conditions    the smaller the deviation angle between the DMS camera and the driver's front face    the better    and it is best to face the driver directly
DAS camera
3 . BSD camera   car side view camera   car left and right cameras
4 .  Installation of sound and light alarms
BSD cameras and sound and light alarms can monitor blind spots and alert pedestrians when approaching
1) Detecting pedestrians or bicycles in blind spots
a .  The longitudinal distance of pedestrians or bicycles in the detection area within the screen
b .  The lateral distance of pedestrians or bicycles in the detection area within the screen
c .  Pedestrians or bicycles entering the detection screen from the rear
d .  Pedestrians or bicycles entering the detection screen from the side
e .  Pedestrians or bicycles entering the detection screen head-on
2) After detecting that pedestrians are too close    sound and light alarms will be broadcasted to remind drivers and pedestrians to pay attention to safety
3) The BSD camera is a starlight camera  displaying in full color at night

 

a .  Lateral BSD cameras are generally used on medium to large vehicle models with large blind spots  such as dump trucks   large trucks  and mixer trucks   When installing   the camera should be installed at the edge of the blind spot closest to the back (lateral BSD is recommended to be installed at the right rear)   In order to better detect pedestrians in the blind spot   the installation position should be about 1.8 meters above the ground   and the camera angle should be adjusted to slightly face outward and downward   so that the image can cover most of the blind spot and the vehicle body accounts for no more than 25% of the image

 

b  .  The forward facing BSD camera is also applied to large vehicles   and is generally installed on the cover above the driver's windshield   with the installation position as centered as possible
The extension cable of the camera should be routed from below the vehicle and fixed through the frame itself   without interfering with the truck bucket or mixing tank   to avoid affecting the wire during unloading or mixing

 

c  .  The sound and light alarm should be installed outside the passenger seat   near the car window   so that the voice broadcast can be more clearly received by pedestrians   while also allowing the driver to hear the alarm sound

 

We are a professional manufacturer of research and development, production, and vehicle monitoring

Car video recorder, car camera, car usb camera, car display, usb camera

Please contact us by email: firecore1688@163.com

WeChat and phone: 0086+13823606792

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot Products

Bus mounted side mounted Formal attire The dedicated night vision high - definition camera adopts a ...
Car mounted AHD panoramic high-definition million camera: Image processing uses 8 low-power LED ...
The input voltage of this camera is 12 - 24V with a 7070 chip and infrared night vision automatic ...
industrial structure Car mounted cameras are mainly divided into three markets : upstream midstream ...
USB HD Car Camera Drive free HD Waterproof USB Camera 1080P USB Dash Camera Car mounted cameras are ...
USB Dash Camera Bus interior high-definition monitoring with 1080PUSB camera DMS camera driver ...