Home Companies Shenzhen Firecore Technology Co., Ltd.

AHD Monitoring CCTV Camera Installation In Bus Night Vision High Definition

Shenzhen Firecore Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Factory address 3rd Floor Building A Jingjiang Industrial Zone No 101 Shangwei Road Zhangkeng Path Guanlan Street Longhua District Shenzhen Guangdong, China

Contact name:YUKI

Inquir Now

Shenzhen Firecore Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

AHD Monitoring CCTV Camera Installation In Bus Night Vision High Definition

Country/Region china
City & Province shenzhen guangdong
Categories Workplace Safety Supplies
InquireNow

Product Details

Bus CCTV Camera 24V car mounted camera starry night vision high - definition rear view image of cars

 

1 . 1 Camera installation
Figure (2) Monitoring effect of four cameras
This system requires the installation of four cameras  as shown in Figure (2)   Front facing cameras are divided into two types  dedicated and general - purpose cameras   Dedicated cameras are installed on the vehicle emblem   as shown in Figure (3)   Universal external cameras can be installed on air intake grilles   bumpers   or other suitable locations 
Figure (3) Front view installation rendering
The cameras on both sides are installed on the rearview mirror  as shown in Figure (4)
 

Figure (4) Installation effect of cameras on both sides
1. 2 Installation of monitor   Connect the line to the DVD host according to the wiring diagram
1. 3 Installation of the host :  After connecting the lines according to the wiring diagram   place the host in a storage box or install it in a suitable position inside the car   The vibration sensor is attached to the vehicle body
6 .  Operation method of panoramic monitoring system
There are two modes of operation for the monitoring system :  automatic mode and manual mode  Automatic mode and manual mode can be used together simultaneously  The manual mode can be controlled through the steering lever or membrane switch (optional)   and the control of the steering lever and membrane switch is consistent

 

360 ° panoramic monitoring system display screen switching operation method 

 

(1)  Four screen :  When the car starts   the host and camera start to work  and the screen is in an H - shaped four split mode   displaying four screens :  "front"  "back"  "left"   and "right" (hereinafter referred to as the basic screen mode)   After a delay of 15 seconds   the display automatically turns off and switches to navigation and audio mode   but the entire system is still in recording mode

 

(2) Front view  In the basic graphics mode    the front camera works by using the film switch or lifting the steering lever upwards   The display screen displays the front view of the car separately   Press the film switch again or lift the steering lever upwards to turn off the display and switch to navigation and audio mode

 

(3) Rear view   When reverse gear is engaged   the display automatically switches to the reverse view screen  which is the rear view display mode   If you exit reverse gear   turn off the rearview display mode and automatically enter the basic screen mode  After a delay of 15 seconds   the display will automatically turn off and switch to navigation and audio mode 

 

(4) Side view  In the basic graphics mode   when turning on the left or right turn lights   the display screen switches to the left and right display modes   cancels the turn signal   and the screen automatically switches to the basic graphics mode   with a delay of 5 seconds to turn off the display and switch to navigation and audio mode 

 

(5) Side and rear view :  When reverse gear is engaged and turn signals are turned on   the display screen switches to a three screen display mode   where the lower half of the display screen displays the reverse rear view screen and the upper left corner displays the front left image of the car  The upper right corner displays the front right image of the car    On this basis, exit reverse gear    and when the turn signal is powered on    the display screen switches to the left and right display modes  The left side displays the left front screen of the car  and the right side displays the right front screen of the car   When the turn signal is cancelled  the screen automatically switches to the basic screen mode   with a delay of 15 seconds to turn off the display and automatically switch to the navigation audio mode

 

(6) During the operation of the car   pressing the membrane switch or lifting the steering lever upwards can enter

 

We are a professional manufacturer of research and development    production   and vehicle monitoring

Car video recorder    car camera    car usb camera    car display   usb camera

Please contact us by email :  firecore1688@163.com

WeChat and phone : 0086+13823606792

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot Products

Bus mounted side mounted Formal attire The dedicated night vision high - definition camera adopts a ...
Car mounted AHD panoramic high-definition million camera: Image processing uses 8 low-power LED ...
industrial structure Car mounted cameras are mainly divided into three markets : upstream midstream ...
The input voltage of this camera is 12 - 24V with a 7070 chip and infrared night vision automatic ...
Product specifications Image sensor : 1 / 4 inch CMOS PC7070 Lens material : 100 % glass Effective ...
Truck Security Cameras High definition waterproof LED reverse monitoring AHD wide - angle rear view ...